Smoothing
The smoothing function is to smoothly connect the slope
of the initial gain and the base curve.
You can select from among four types: off, narrow,
medium, and wide.
Linear curve of the initial gain
Select the type of smoothing.
Note
if the setting cannot be changed, owing to the limits of the
camera settings, an exclamation symbol, as shown below,
appears on the graph.
18
Functions and Operations of the Component Windows
Base curve (black)
Curve after smoothing
(red)
To switch to Custom Edit mode
Custom Edit mode is used for fine editing that cannot be
done in Parameter Edit mode.
Double-clicking on a gamma data on the list whose Base
column does not show "Param" activates Custom Edit
mode.
The following adjustments can be made in Custom Edit
mode:
• White level/dynamic range adjustment
See "To adjust the white level and dynamic range"
(page 19).
• Black adjustment
See "To adjust the black" (page 20).
• Middle tone adjustment
See "To adjust the middle tone" (page 20).
• Minus data adjustment
See "To adjust the minus data" (page 20).
• Three-point adjustment
See "To perform 3-point adjustment" (page 20).
• Vertical shift of the curve
See "To move the curve holistically in vertical
directions" (page 21).
Base column