Remedying Typical Troubles - Fujitsu fi-60F Operator's Manual

3.1 Remedying Typical Troubles

This section describes troubles that may occur during scanning and how to remedy that trouble.
Before you ask for repair, check the following flowcharts.
If the remedies in these flowcharts do not solve the problem, check the items in "3.2 Items to
Check Before Contacting the Agent Where You Bought the Scanner" (page 32) and then contact
the agent where you bought the scanner.
Symptom 1
Are power cable, the AC adapter
and the USB cable correctly
connected?
If you cannot solve the problem
after taking measures, check the
items in "3.2 Items to check before
contacting the dealer where you
bought the scanner" and contact
the dealer or an authorized
FUJITSU service provider.
26
Scanner cannot be turned ON.
YES
Is your PC turned on?
YES
Is the Scanner driver installed
correctly?
YES
NO
Correctly connect power cable,
USB cable and the AC adapter.
NO
Turn on your PC.
Install the Scanner driver
NO
correctly. Refer to "2.1
Installing the Scanner
Application" of Getting
Started.