Appendix 2 Daily Care; Cleaning Materials; Cleaning Method - Fujitsu fi-5110C Getting Started

Appendix 2
When operating the scanner, the
ARNI N G
ADF's inside glass becomes
very hot.
Before you clean inside the
scanner, turn off its power and
unplug the AC adapter from the
outlet. Wait for at least
15 minutes.
Do not turn off the scanner when
you clean the Feed rollers or
Eject rollers.

■ Cleaning Materials

Cleaning Parts
Materials Number
Cleaner F1 CA99501-
(or isopropyl 0013
alcohol)
Lint-free dry Commercially available one
cloth
* For details about cleaning materials, contact the
FUJITSU scanner dealer where you purchased the
scanner.

■ Cleaning Method

The ADF must be cleaned with a lint-free cloth
moistened with the Cleaner F1.
Do not use aerosol sprays to clean
ATTENTION
the scanner. Aerosol sprays can blow
dirt and dust inside the scanner,
resulting in scanner failure or
malfunction.
DAILY CARE
Remarks
1 bottle
Moisten the cloth
with this fluid and
wipe the scanner
clean.(*)
fi-5110C Image Scanner Getting Started
■ Parts to Clean and When
Part to clean
Pad ASSY
Pick roller
Feed rollers
Plastic rollers
Glass
The scanner must be cleaned
ATTENTION
frequently if you scan any of the
following type of paper sheets:
•
Documents of coated paper
•
Documents that are almost completely
covered with printed text or graphics
•
Chemically treated documents such as
carbonless paper
•
Documents containing a large amount
of calcium carbonate
•
Handwritten documents
For details on the cleaning the ADF, refer to " Chapter 4
Daily Care " in fi-5110C Operator's Guide in the Setup
CD-ROM".
Standard Cleaning Cycle
Clean these parts after every
1,000 scans.
AP-4