Fujitsu fi-4340C Operator's Manual page 72

4 Reset of the abrasion counter
When you reset the abrasion counter, you must set it as follows:
1. Press "Next" or "Previous"
Screen 6
2. At Screen 6;
If you want to reset the abrasion counter, select "Yes" through
procedure 3.
If you do not want to reset the abrasion counter, select "No" and press
return.
3. At Screen 7;
If you want to reset the abrasion counter, select "Yes" and press
select "No" and press
Screen 7
5 Setting the pick start time
When you set the pick start time, you must set it as follows:
1. Press "Next" or "Previous"
Screen 8
2. At Screen 8, press
press to activate the setting. Finally press
G 7-8
and let the scanner display Screen 6.
.Press to return.
and let the scanner display Screen 8.
to increase the Pick start time or press
or button and press
. Finally press
. If you do not want to reset it,
to decrease the Pick start time. Then
to return.
. Go to
to