Fujitsu MHV2040BH Product Manual page 169

8C73h
C837h
Others
*4 Word 49: Capabilities
Bits 15-14: Reserved
Bit 13:
Bit 12:
Bit 11:
Bit 10:
Bit 9:
Bit 8:
Bits 7-0:
*5 Word 50: Device capability
Bit 15:
Bit 14:
Bit 13 to 1 Reserved
Bit 0
*6 Word 51: PIO data transfer mode
Bits 15-8: PIO data transfer mode
Bits 7-0:
*7 Word 53: Enable/disable setting of word 54-58 and 64-70
Bits 15-3: Reserved
Bit 2:
Bit 1:
Bit 0:
C141-E224
The device requires the SET FEATURES sub-command after the
power-on sequence in order to spin-up. The Identify information
is incomplete.
The device requires the SET FEATURES sub-command after the
power-on sequence in order to spin-up. The Identify information
is incomplete.
Reserved
Standby timer value. ATA spec is '1.'
Reserved
'1' = IORDY supported
'1' = IORDY inhibition supported
'1' = DMA supported
'1' = LBA supported
Undefined
0
1
Standby timer value '1' = Standby timer value of the device is the
smallest value.
Undefined
'1' = Enable the word 88
'1' = Enable the word 64-70
'1' = Enable the word 54-58
5.3 Host Commands
X'02'=PIO mode 2 supported
5-93