GE JGS750SEFSS Dimensions And Installation Information

JGS750SEF
31 1/4"
GE 30" Slide-In Gas Range
cooktop edge to edge
Dimensions and Installation Information (in inches)
Note: Door handle protrudes 3" from door face. Cabinets and
drawers on adjacent 45° and 90° walls should be placed to
avoid interference with the handle.
Note: Cabinets installed adjacent to slide-in ranges must
have an adhesion spec of at least 194° temperature rating.
Installation Information: Before installing, consult
installation instructions packed with product for
current dimensional data.
cooktop edge to edge
26 7/8"
w/o handle
w/ handle
3 1/4"
26 7/8"
w/o handle
29 3/8"
w/ handle
47 5/8"
SINGLE OVEN SLIDE-IN GAS RANGE
31 1/4"
cooktop edge to edge
3 1/4"
SINGLE OVEN SLIDE-IN GAS RANGE
31 1/4"
26 7/8"
w/o handle
29 3/8"
w/ handle
30"
47 5/8"
Minimum to
cabinets on
either side
30"
of the range.
30"
6"
Minimum
Minimum
18"
clearance
to left wall
30"
To cabinets
below 0"
cooktop and
at the range
Minimum to
back
cabinets on
either side
For answers to your Monogram
of the range.
appliance questions, visit our website at
geappliances.com or call GE Answer Center
6"
service, 800.626.2000.
Minimum
18"
clearance
to left wall
SINGLE OVEN SLIDE-IN GAS RANGE
GAS PIPE AND ELECTRICAL
OUTLET LOCATIONS
Recommended area for 120V
outlet on rear wall and area for
through-the-wall conection of
pipe stub and shut-off valve.
GAS PIPE AND ELECTRICAL
OUTLET LOCATIONS
Recommended area
for through-the-floor
30"
connection of pipe stub
and shut-off valve.
Recommended area for 120V
outlet on rear wall and area for
through-the-wall conection of
Minimum to
cabinets on
pipe stub and shut-off valve.
either side
30" Maximum
of the range.
30" cabinets above
6"
countertops
Minimum
Minimum
18"
clearance
6" to left wall
Minimum
clearance to
for through-the-floor
right wall
connection of pipe stub
To cabinets
below 0"
cooktop and
at the range
back
36"
30"
® or GE ®
30"
®
6"
Minimum
Minimum
clearance to
right wall
30"
4 1/2"
GAS PIPE AND ELECTRICAL
OUTLET LOCATIONS
5"
4"
8"
Recommended area for 120V
outlet on rear wall and area for
through-the-wall conection of
pipe stub and shut-off valve.
14 1/2"
9"
3"
2"
Recommended area
for through-the-floor
connection of pipe stub
and shut-off valve.
4"
Maximum
depth for
cabinets above
countertops
depth for
9"
6"
Minimum
2"
clearance to
right wall
13"
Recommended area
and shut-off valve.
36"
Front edge of
the range side
panel forward
from cabinet
0"
* ADA qualified based
Maximum
*
To cabinets below cooktop
on Uniform Federal
depth for
and at the range back Accessibility Standards
cabinets above
countertops
13"
Specification Revised 9/13
30"
24"
4 1/2"
35" to 36 1/2"
24"
floor to counter
5"
4"
8"
14 1/2"
9"
30"
3"
2"
4 1/2"
24"
5"
35" to 36 1/2"
floor to counter
8"
14 1/2"
3"
13"
Front edge of
the range side
panel forward
from cabinet
0"
To cabinets below cooktop
and at the range back
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
330239
35" to
floor to