Step4:
Tear off the mylar.
Step5:
Unscrew four screws to remove the DMD heatsink and the heatsink cover.
Step6:
Unscrew four screws to remove Bracket Plate, Insulation Mylar, DMD Board and DMD Chip.
Step7:
Separate Blower Fan 60x25 Module from Optical Engine Module and then detach Blower Fan
60x25 from the Silicon Rubber.
ViewSonic Corporation
Blower Fan 60x25
Silicon Rubber
2-8
DMD Board
Insulation Mylar
Bracket Plate
DMD Chip
PJ755D