Advertisement
DESIGNATION
Printer mechanism
Interface board
Micro Controller Unit
LSI
Gate Array
*: Rear paper insertion type is available: FTP-633MCL402
GENERAL SPECIFICATIONS
Item
Printing method
Dot structure
Dot pitch (Horizontal)
Dot pitch (Vertical)
Effective printing area
Printing mode
Maximum printing speed
Character types
Character grade mode
Character composition, dimensions (H W),
Number of columns (standard)
Interface
FTP-633MCL400/FTP-623DCL002
Item
Thermal-sensitive line dot method
512 dots/line
0.125 mm (8 dots/mm)—Dot density
0.125 mm (8 dots/mm)—Line feed pitch
64 mm
(1) Single density
(2) Double density mode
Approximately 24 character lines/s (480 dotlines/s = 60 mm/s)
[1ply, 8 columns of "H", double density, 7.2 V, 1/10" line returns]
Approximately 16 character lines/s (416 dotlines/s = 52 mm/s)
[1ply, 12 columns of "H", double density, 7.2 V, 1/8" line returns]
JIS ANK
: 128
Semi-graphic :
36
Special
:
30
Standard character (12
Single density standard : 24
Single density reduced*
Double density
1) Centronics standard
Part number
FTP-633MCL400*
FTP-623DCL002
FTP-623CU001
FTP-633GA101
Specifications
Standard mode
HS mode 1. to 3.
HQ mode
Reduced mode
HS mode 1. to 3.
HQ mode
ASCII
: 31
International characters : 130
Download
:
6 dot font)/High grade character (16
12 dots, (3.0
1.5 mm), 42 columns
32
16 dots, (4.0
2.0 mm), 32 columns
1
: 24
12 dots, (3.0
1.5 mm), 42 columns
32
16 dots, (4.0
2.0 mm), 32 columns
: 16
8 dots, (2.0
1.0 mm), 64 columns
2
2) Bus interface*
8
8 dot font)
(Continued)
2
Advertisement
