Download Print this page
Fujitsu FTP-623DCL002 Specification Sheet
Fujitsu FTP-623DCL002 Specification Sheet

Fujitsu FTP-623DCL002 Specification Sheet

Battery drive, micro line thermal printer 2” type mechanism and interface board
Hide thumbs Also See for FTP-623DCL002:

Advertisement

Quick Links

BATTERY DRIVE, MICRO LINE THERMAL PRINTER
2" TYPE MECHANISM AND INTERFACE BOARD
FTP-623MCL400/FTP-623DCL002
OVERVIEW
This battery driven, micro line thermal printer provides high speed
printing for 2-inch wide (58mm) paper. It is suitable for portable
equipment that requires compact, light weight components.
In addition to the interface board, a driving LSI (MCU + Gate Array)
is also available.
HIGHLIGHTS
• Driven by batteries (direct connect between thermal head
and batteries)
It can be driven by a broad range of voltages (4.2 to 8.5 V) of
NiCd or Nickel-Hydrogen by using Fujitsu Components' unique
head drive control system. The battery pack can be connected
directly to the print head without a voltage regulator. Also, a
lithium-ion battery can be used.
• High speed printing
It can print at approximately 23 character lines/s (460 dotlines/s =
57.5 mm/s).
• Compact and lightweight
It has a light weight of approximately 75 g.
• Low power consumption
The peak current for head driving is approximately 3.0 A.
• Selectable paper paths
Front, rear, and top paper insertion paths can be used.
• Paper auto loading function
Paper feeding is enabled by operating the head up lever.
• Variety of suitable papers
This model is suitable for printing on a variety of papers,
including 1-ply roll paper, 2-ply paper (TCC and roll), labels, and
long-life paper.
FTP-623MCL400
FTP-623CU001, FTP-633GA101
FTP-623DCL002
1

Advertisement

loading

Summary of Contents for Fujitsu FTP-623DCL002

  • Page 1 It can be driven by a broad range of voltages (4.2 to 8.5 V) of NiCd or Nickel-Hydrogen by using Fujitsu Components' unique head drive control system. The battery pack can be connected directly to the print head without a voltage regulator. Also, a lithium-ion battery can be used.
  • Page 2: General Specifications

    Printing mode Maximum printing speed Character types Character grade mode Character composition, dimensions (H W), Number of columns (standard) Interface FTP-623MCL400/FTP-623DCL002 Specifications Thermal-sensitive line dot method 384 dots/line 0.125 mm (8 dots/mm)—Dot density 0.125 mm (8 dots/mm)—Line feed pitch 48 mm...
  • Page 3 *1: Character composition for single density reduced mode is the same as for single density standard mode. *2: The data to be printed is automatically read out by the printer driver equipment memory (host system frame memory). The communication is parameter transfer.
  • Page 4 FTP-623MCL400/FTP-623DCL002 DIMENSIONS Printer mechanism FTP-623MCL400 Unit: mm Front and top insertion type FTP-623MCL402 Unit: mm Rear insertion type...
  • Page 5 FTP-623MCL400/FTP-623DCL002 Interface board 108.0 102.9 69.8 ø3.6 16.5 73.7 102.9 Height of devices side Height of solder side Unit: mm...
  • Page 6 INTERFACE 1. Centronics standard (1) Connector Connector part number : FCN-215Q030-G/0 (Fujitsu Components) or equivalent Mating connector part number : FCN-217Q030-G/0 (Fujitsu Components) or equivalent (2) Connector pin assignment Signal PRSTB Data strobe PRDT0 Data 0 PRDT1 Data 1 PRDT2...
  • Page 7: Bus Interface

    2. Bus interface (1) Connector Connector part number : FCN-215Q040-G/0 (Fujitsu Components) or equivalent Mating connector part number : FCN-217J040-G/0 (Fujitsu Components) or equivalent : FCN-214J040-G/0 (Fujitsu Components) or equivalent : FCN-215J040-G/0 (Fujitsu Components) or equivalent (2) Connector pin assignment...
  • Page 8: Connector Pin Assignment

    : B6B-XH-A-WHITE (J.S.T) or equivalent Mating connector part number : XHP-6 (J.S.T) or equivalent Signal Contents — Power supply for head/motor — Power supply for head/motor — Head/motor ground FTP-623MCL400/FTP-623DCL002 P.C.B side Cable side Signal — Logic ground P.C.B side Cable side Signal —...
  • Page 9 Mating connector part number : XHP-3 (J.S.T) or equivalent Signal Contents TMPER Abnormal head temperature detection — Logic ground Note: This signal detects abnormal head temperature. FTP-623MCL400/FTP-623DCL002 P.C.B side Signal — Power for head — Head ground Printing data latch...
  • Page 10 Paper auto loading detection SLED — Power for diode cathode MT/B0 Stepping motor coil excitation (B) MT/A0 Stepping motor coil excitation (A) 10 FTP-623MCL400/FTP-623DCL002 P.C.B side Mechanism side Signal — Power for switch — Power for photointerrupter Paper out detection...
  • Page 11 Automatic paper loading length set Automatic printing speed set Printer initialization Notes: *: “SP” means the space code (20H). Bus interface uses different commands. FTP-623MCL400/FTP-623DCL002 Command LF, CR Prints buffer data and returns the line. Sets the double width character. DC2, DC3 Reduces power consumption during stand by.
  • Page 12 Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com © 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 09/2001 FTP-623MCL400/FTP-623DCL002 Part number FTP-621Y202...

This manual is also suitable for:

Ftp-623mcl400