Step 2 - Power Up The Drive - Maxtor STM320004SDA20G-RK - Shared Storage II NAS Server User Manual

MAXTOR SHARED STORAGE II WINDOWS INSTALLATION
Step 2 – Power up the Drive
1. Press the round black button on the back panel of your
Maxtor Shared Storage Drive. The green LED (light) with
illuminate in the center of the power button.
Power Button
Activity LED
Ethernet LED
2. Your drive will now start. The startup process can take up
to one minute to complete.
Shared Storage Drive Power/Status LED Definitions
Various LED activity will appear on your Shared Storage II
Drive when power is applied. The following tables define the
meaning/status of each LED on the back and front panels:
Back Panel LEDs
LED Definition
Power LED Power switch
(located in
center of the
power button)
Ethernet LED Shows if the drive is
(located on connected through a 10/100 or
bottom side of a 1 Gb Ethernet connection.
Ethernet
connector) Left Green – 10/100 Mbps
Ethernet connectivity
Left Amber – 1 Gbps Ethernet
connectivity
Activity LED A flashing Activity LED
(located on top indicates that the network
side of Ethernet connection is functional and
connector) that packets are being
transmitted or received.
PAGE 4
Front Panel LEDs
LED
Top Power Activity
Center Hard Disk Activity Illuminated – Power On
Bottom Network Activity
Status
Illuminated – Power On
Not Illuminated – Power Off
Illuminated – Power On
Blinking – Network
communication is occurring
Not Illuminated – Power Off
Definition Status
Illuminated – Power On
Blinking – Drive is either powering up or
shutting down
Not Illuminated – Power Off
Blinking – Data is being transferred to/from the
drive
Not Illuminated – Power Off
Illuminated – Power On
Blinking – Network communication is occurring
Not Illuminated – Power Off
Power Activity
Hard Disk Activity
Network Activity