Run Set-Up Wizard - Maxtor STM320004SDA20G-RK - Shared Storage II NAS Server User Manual

MAXTOR SHARED STORAGE II WEB USER INTERFACE

Run Set-up Wizard

The Run Set-up Wizard will aid in the initial configuration of
your Shared Storage Drive. From the Wizard, you can:
– Change the language used by the Web UI
– Manually set Date/Time or enable/configure a Network
Time Server
– Name your Shared Storage Drive and assign it to a
workgroup
– Create the administrative password to secure the
administrative functionality of the Shared Storage
Drive
1. From the Maxtor Shared Storage Drive – Home Page,
click Run Set-up Wizard.
The following page is displayed:
Step 1 of 2
Use this page to enter your language preference, today's
date, and the current time. To change the date and time later,
use the Advanced, Language, Date and Time settings page.
To Select the Language
1. Use the pull down menu and select your language.
Network Time Protocol
This option allows the Shared Storage Drive to maintain time
via an Internet time server. By default, this feature is disabled.
Note: This feature can only be used if the Shared Storage
Drive is connected to the Internet.
1. To enable the Network Time Protocol, click Enable.
2. Choose a continent (Asia or Europe), country (USA) or a
user defined NTP server name as the default NTP server.
If you choose to use a user defined NTP server name,
enter the name in the field provided.
PAGE 38
3. Select your Time Zone.
4. To disable the Network Time Protocol feature, click
Disable and then click Next.
To Set the Date
Note: Skip this step if Network Time Protocol was
configured.
1. Type in the Date using the (mm/dd/yyyy) format.
To Set the Time
Note: Skip this step if Network Time Protocol was
configured.
1. Type in the current time using the (hh:mm:ss) format,
make sure to indicate AM or PM.
2. Click Next.
Step 2 of 2
Use this page to assign the Shared Storage Drive a network
name, identify the workgroup (Domain) to which it belongs,
and to add/change the Admin password for your Shared
Storage Drive.
To Set the Name of Your Shared Storage Drive
1. Enter the name of your choice in the Name field.
To Set the Workgroup (Domain) that you would like your
Shared Storage Drive to be in
1. Enter the Workgroup (Domain) name of your choice in the
Workgroup field.
To Set an Administrator Password
1. Select the Yes button to indicate that you want to have a
password on the Administrator account.
2. Type in the new password and then verify the password by
retyping it.
3. Click Next.