Step 3 - Setup The Drive - Maxtor STM320004SDA20G-RK - Shared Storage II NAS Server User Manual

MAXTOR SHARED STORAGE II MACINTOSH INSTALLATION

Step 3 - Setup the Drive

1. Insert the Maxtor Shared Storage II Installation Software
into your CD-ROM drive and double-click the Install CD
icon.
2. Then double-click the Maxtor EasyManage.pkg icon to
launch the program.
3. From the Welcome screen, click Continue.
4. Review the License Agreement and click Continue.
5. To accept the terms of the License Agreement, click
Agree.
6. Select a destination to install the EasyManage software
and click Continue.
7. To start the installation, click Install.
8. When prompted, type your Name and Password of the
user to authenticate.
Click OK to proceed.
9. A restart is required to complete the installation. Click
Continue Installation to proceed.
10. The EasyManage software will install on your computer.
11. When finished, click Restart.
12. When the computer is ready, double-click the
EasyManage icon.
PAGE 24
13. The EasyManage software will begin locating Shared
Storage Drives detected on the network.
14. When found, you will see the Network ID number and
IP address for the located drive(s). For example:
MSS-0170CA (192.169.1.108).
15. The EasyManage - Shared Storage Administrator
Password window will appear for all new drives, allowing
you to set administrative security on the Shared Storage
drive.
16. Click Yes to launch the Web User Interface and set an
administrative password.
Note: See "The Web UI" later in this guide for details on
using the Maxtor Shared Storage Web UI - Shared Folder
Backup for more information on configuring these
settings.