Fiery TASKalfa 3051ci Configuration page 41

A
DMINISTERING THE
T S U
O SCHEDULE YSTEM PDATES
1 Access System Update.
You can access System Updates from a client computer using WebTools or Command
WorkStation.
From a client using Command WorkStation
• Start Command WorkStation.
• Log on as Administrator with the appropriate
password.
• Choose Configure > Server > System Update.
While updates are being installed, you cannot print to the E100. Schedule automatic
N :
OTE
updates when no one plans to print. The E100 may also need to reboot several times during
the update process.
2 Select "Enable System Updates."
3 Specify how often the E100 contacts the Update Server.
This feature sets a schedule for installing updates.
4 If you use a proxy server to connect through a firewall to the Update Server, click Proxy
Settings, select Enable Proxy, and type the appropriate information in the following fields:
• Address: proxy server IP address
• Port: port used by the proxy server
• User Name: user name for accessing the proxy server
• Password: password for accessing the proxy server
5 In the Proxy Settings window, click Save.
6 Click Apply.
F C
IERY ONTROLLER
From a client using WebTools
• Launch a Web browser and type the IP
address or DNS name of the E100 and press
Enter.
• Click the Configure tab, and click Launch
Configure.
• Log on as Administrator with the
appropriate password.
• Choose Configure > Server > System
Update.
41