Fiery TASKalfa 3051ci Configuration page 29

S C T P 29
ETTING UP THE OPIER OUCH ANEL
Subnet Mask
255.255.255.0
Set the subnet mask for printing with TCP/IP on your network.
Confirm the subnet mask setting with your network administrator before proceeding.
Gateway Type
Automatic, Manual
Choose the method for obtaining the gateway address for printing with TCP/IP.
Gateway Address
127.0.0.1
If you answered Manual to the previous option, set the gateway address for printing with
TCP/IP on your network.
Web Services
On, Off
Select On to make the WebTools available to users. TCP/IP must be enabled on the E100 and
user workstations. A Java-enabled Web browser and a valid IP address or DNS host name are
required for each user computer.
If Web Services is set to Off, Setup from the copier touch panel is not available. In this
instance, to enable Setup from the copier touch panel you must select Enable IPP from
WebTools Configure (Configure > Network > Services > Web [http]) and then reboot the
E100. For information about how to access WebTools Configure, see page 31.
Network Security
On, Off
Select Off if you have inadvertently closed a port and need to access the E100. If you set this
option to Off, the following features are disabled:
• IP Filtering
• Port Filtering
• Mac Addr Filtering
Login timeout
5 minutes, 10 minutes, 15 minutes, 30 minutes, 45 seconds, never
Specify the amount of time the E100 times out after you log on.
When you are done making changes, press Save Changes. The E100 requires a reboot in order
for any Setup changes to take affect.