Fiery TASKalfa 3051ci Configuration page 34

Option
Copier Mode
Convert Paper Sizes
Default Orientation
Default Paper Sizes
Font Number
Font Pitch (char/in)
Font Size (pt)
Font Source
Form Length (lines)
Offset Jobs
Paper Size for System Pages
Print Cover Page
S O R
ETUP PTION EFERENCE
Settings
(default is underlined)
Gradation, Resolution
x
No, Letter/11 17->A4/A3,
x
A4/A3->Letter/11 17
Portrait, Landscape
US, Metric (default is US in
the United States, Metric
elsewhere)
0-999
0.44-99.99 (default is 10.00) If the default PCL font selected in Font Number represents a fixed
4.0-999.75 (default is 12.00) If the default PCL font selected in Font Number represents a
Internal, Soft Font
5-128 (default is 60)
On, Off
US, Metric (default is US in
the United States, Metric
elsewhere)
No, Before Job, After Job,
Before and After
Description
Specify the default screen to print jobs.
Converts paper sizes in documents automatically to the default paper
sizes specified. For example, if you select Letter/11
size document is automatically printed on A4 paper.
This option works in conjunction with the Default Paper Sizes option.
For example, if Convert Paper Sizes is set to Letter/11
Default Paper Sizes is set to US, jobs are printed A4/A3 size. This also
includes E100 system pages such as the Start Page, Test Page, and Job
Log.
This PCL option determines whether the text or image will be oriented
along the short edge of the paper (portrait) or along the long edge of
the paper (landscape).
Prints on US paper sizes (for example, Letter, Legal, 11
paper sizes (for example, A4 or A3) by default. When no page size is
defined within a PostScript file, jobs are printed on Letter paper if you
select US; A4 paper if you select Metric.
The font number designates the default font for the E100. To
determine font numbers, print the internal PCL Font List. The
standard fonts are listed in order. The font numbers, however, are not
displayed.
pitch scalable font, determine the width of scalable type. Pitch is
measured by characters per inch, so 10-pitch type fits ten characters per
inch.
proportionally spaced scalable font, determine the point size (height) of
the font.
Specify the PCL font source to be enabled.
This option sets the number of lines to be printed per page in PCL
jobs.
Specify whether jobs are offset after they are printed. You must install a
finisher.
Specify the paper size that PCL system pages print on. System pages are
pages that you print from the copier touch panel, such as the PCL Font
List.
Prints a cover page (job summary) with the name of the user who
sent the job, document name, server name, time the job was printed,
number of pages printed, and status of the job.
34
x
17->A4/A3, a letter
x
17->A4/A3, and
x
17), or Metric