Dynamic Threshold - Fujitsu M3097G Oem Manual

D.1.1.6

Dynamic threshold

f The change was made to the bytes in the set window parameter as follows:
- Byte 3E
f M3096G:
f M3097G: DTC SELECTION BYTE
Byte 3E b7 b6
Example: Xπ00π is ™Default; Simplified DTC, if IPC II option is selected∫.
- Byte 2F
f M3096G: Reserved
f M3097G: The definitions of the byte are the same as those of M3097G
- Byte 30
f M3096G: Reserved
f M3097G: The definitions of the byte are the same as those of M3097E
f How to specify the parameter
- When Simplified DTC is used:
Specified
SELECTION)=Xπ00π or Xπ80π.
- When Dynamic threshold is used:
Specify as ™Byte 17=Xπ00π, Byte 3E=Xπ40π, Byte 2F/30∫.
Xπ00π: Default; Simplified DTC, if IPC option is selected.
Xπ01π to XπFFπ Reserved
b5 b4 b3 b2 b1
Reserved
DTC SELECTION
0 0: Default; Simplified DTC, if IPC II optioned.
0 1: Dynamic threshold
1 0: Simplified DTC, if IPC II optioned.
1 1: Reserved
control register #3.
Manual 50FH5037E.
Restrictions: This byte is effective only when byte 3E is Xπ40π.
control register #4.
Manual 50FH5037E.
Restrictions: This byte is effective only when byte 3E is Xπ40π.
as ™Byte 17
b0
Reserved
For further details, refer to OEM
For further details, refer to OEM
(threshold)=Xπ00π, Byte 3E (DTC
D $ 9