Dell Precision M2300 Service Manual
  1. Manuals
  2. Brands
  3. Dell Manuals
  4. Laptop
  5. Precision M2300
  6. Service manual
Dell Precision M2300 Service Manual

Dell Precision M2300 Service Manual

Dell precision m2300 service manual
Hide thumbs Also See for Precision M2300:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Quick Reference Manual
Dell Precision ™ M2300 Service Manual
Before You Begin
Using Cards
Media Bay Devices
Hard Drive
Hinge Cover
Keyboard
Memory
Display Assembly
Internal Card With Bluetooth® Wireless Technology
Communications Cards
Model PP18L
Notes, Notices, and Cautions
NOTE:
A NOTE indicates important information that helps you make better use of your computer.
NOTICE:
A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
CAUTION:
A CAUTION indicates a potential for property damage, personal injury, or death.
Information in this document is subject to change without notice.
© 2007 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, and Precision are trademarks of Dell Inc.; Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks
of Microsoft Corporation; Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. and is used by Dell under license.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
September 2007 Rev. A00
Coin-Cell Battery
Palm Rest
Modem
Processor Thermal-Cooling Assembly
Processor
PC Card Reader
Speaker
System Board
Fan
Flashing the BIOS

Advertisement

Table of Contents
loading

Related Manuals for Dell Precision M2300

Summary of Contents for Dell Precision M2300

  • Page 1 Microsoft Corporation; Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. and is used by Dell under license. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

  • Page 2: Before You Begin

     You have performed the steps in Turning Off Your Computer.  You have read the safety information in the Dell™ Product Information Guide.  A component can be replaced or—if purchased separately—installed by performing the removal procedure in reverse order.  Recommended Tools The procedures in this document may require the following tools:  Small flat-blade screwdriver...
  • Page 3 NOTICE: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty. NOTICE: Handle components and cards with care. Do not touch the components or contacts on a card. Hold a card by its edges or by its metal mounting bracket.

  • Page 4: Flashing The Bios From A Cd

    1. Ensure that the AC adapter is plugged in, the main battery is properly installed, and a network cable is attached.   2. Turn on the computer.   3. Locate the latest BIOS update file for your computer at support.dell.com.   4. Click Download Now to download the file.  ...

  • Page 5: Internal Card With Bluetooth® Wireless Technology

    Back to Contents Page   Internal Card With Bluetooth® Wireless Technology Dell Precision ™ M2300 Service Manual CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Dell™ Product Information Guide.  CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.
  • Page 6 6. Lift the card from the compartment, ensuring that you do not pull on the card cable with excessive force.   7. Disconnect the card from the cable and remove the card from the computer. Back to Contents Page  ...

  • Page 7: Pc Card Reader

    Back to Contents Page   PC Card Reader Dell Precision ™ M2300 Service Manual CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Dell™ Product Information Guide.  CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.

  • Page 8: Coin-Cell Battery

    Back to Contents Page   Coin-Cell Battery Dell Precision ™ M2300 Service Manual CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Dell™ Product Information Guide.  CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.

  • Page 9: Removing The Processor

    Back to Contents Page   Processor Dell Precision ™ M2300 Service Manual   Removing the Processor   Installing the Processor  Removing the Processor CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Dell™ Product Information Guide.  CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.
  • Page 10 CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer. NOTICE: Ensure that the cam lock is in the fully open position before seating the processor. Seating the processor properly in the ZIF socket does not require force.

  • Page 11: Removing The Display Assembly

    Back to Contents Page   Display Assembly Dell Precision ™ M2300 Service Manual   Removing the Display Assembly   Removing the Display Bezel   Removing the Display Panel   Removing the Display Panel Brackets   Removing the Display Panel Cable   Removing the Display Hinges  Removing the Display Assembly CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Dell™ Product Information Guide. ...

  • Page 12: Removing The Display Bezel

    13. Lift the display assembly out of the computer base.  Removing the Display Bezel CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Dell™ Product Information Guide.  CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.

  • Page 13: Removing The Display Panel

     Removing the Display Panel CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Dell™ Product Information Guide. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.

  • Page 14: Removing The Display Panel Brackets

    6. Draw the display cable pull-tab away from the top cover to release the display cable, and lift the display panel fully from the top cover.  Removing the Display Panel Brackets CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Dell™ Product Information Guide.  CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.

  • Page 15: Removing The Display Hinges

     Removing the Display Hinges CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Dell™ Product Information Guide.  CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.  ...
  • Page 16 Back to Contents Page   Fan Dell Precision ™ M2300 Service Manual CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Dell™ Product Information Guide.  CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.

  • Page 17: Hard Drive

    To avoid damaging the hard drive, handle the drive with care. NOTE: Dell does not guarantee compatibility or provide support for hard drives from sources other than Dell. NOTE: You need the Operating System installation media to install the Microsoft® Windows® operating system. You also need the Drivers and Utilities media for your computer to install the drivers and utilities on a new hard drive.

  • Page 18: Hinge Cover

    Back to Contents Page   Hinge Cover Dell Precision ™ M2300 Service Manual CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Dell™ Product Information Guide.  CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.

  • Page 19: Removing The Keyboard

    Back to Contents Page   Keyboard Dell Precision ™ M2300 Service Manual   Removing the Keyboard   Replacing the Keyboard  Removing the Keyboard CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Dell™ Product Information Guide.  CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.
  • Page 20 NOTICE: To avoid scratching the palm rest when replacing the keyboard, hook the tabs along the front edge of the keyboard into the palm rest, and then secure the keyboard in place.   1. Connect the keyboard connector to the system board.  ...
  • Page 21 If you remove your original memory modules from the computer during a memory upgrade, keep them separate from any new modules that you may have, even if you purchased the new modules from Dell. If possible, do not pair an original memory module with a new memory module.
  • Page 22 NOTICE: Insert memory modules at a 45-degree angle to avoid damaging the connector.   5. Ground yourself and install the new memory module: a.  Align the notch in the module edge connector with the tab in the connector slot. b.  Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you do not feel the click, remove the module and reinstall it.
  • Page 23 memory-module securing clips (2) memory module     NOTICE: Insert memory modules at a 45-degree angle to avoid damaging the connector.   4. Ground yourself and install the new memory module: a.  Align the notch in the module edge connector with the tab in the connector slot. b.

  • Page 24: Communications Cards

    Back to Contents Page   Communications Cards Dell Precision ™ M2300 Service Manual   Wireless Local Area Network (WLAN) Card   Mobile Broadband Network (WWAN) Card   Subscriber Identity Module (SIM) Card   FCM (Flash Cache Module)  Wireless Local Area Network (WLAN) Card CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Dell™ Product Information Guide.  CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.

  • Page 25: Mobile Broadband Network (Wwan) Card

    Display Assembly).  Mobile Broadband Network (WWAN) Card CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Dell™ Product Information Guide.  CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.
  • Page 26 1. Follow the procedures in Before You Begin.   2. Remove the hinge cover (see Hinge Cover).   3. Remove the keyboard (see Removing the Keyboard). Mobile Broadband network card antenna cables (2)     NOTICE: To prevent damage to the connector, do not use tools to release the securing tabs.  ...

  • Page 27: Subscriber Identity Module (Sim) Card

    Removing the Display Assembly).  Subscriber Identity Module (SIM) Card CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Dell™ Product Information Guide.  CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.
  • Page 28 NOTE: If you ordered an FCM card with your computer, the card is already installed.   1. Follow the procedures in "Before You Begin" on page 111.    2. Remove the hinge cover (see "Hinge Cover" on page 113).    3. Remove the keyboard (see "Keyboard" on page 113).    4. Ground yourself by touching one of the metal connectors on the back of the computer. NOTE: If you leave the area, ground yourself again when you return to the computer.
  • Page 29 Back to Contents Page   Modem Dell Precision ™ M2300 Service Manual CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Dell™ Product Information Guide.  CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.

  • Page 30: Media Bay Devices

    Back to Contents Page   Media Bay Devices Dell Precision ™ M2300 Service Manual NOTICE: To prevent damage to devices, store them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them or placing heavy objects on top of them.

  • Page 31: Palm Rest

    Back to Contents Page   Palm Rest Dell Precision ™ M2300 Service Manual CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Dell™ Product Information Guide.  CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.
  • Page 32 NOTICE: Carefully separate the palm rest from the base to avoid damage to the palm rest.   11. Turn the computer top-side up and remove the palm rest. a.  Starting at the back center of the palm rest, use your fingers to separate the palm rest from the base by lifting the inside edge of the palm rest. b.

  • Page 33: Using Cards

    Back to Contents Page   Using Cards Dell Precision ™ M2300 Service Manual   Card Types   Removing a PC Card or Blank   Installing a PC Card or an ExpressCard   Removing a Smart Card   Installing a Smart Card  Card Types   PC Cards See "Specifications" in your User's Guide for information on supported PC Cards.

  • Page 34: Installing A Pc Card Or An Expresscard

     Installing a PC Card or an ExpressCard CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Dell™ Product Information Guide.  You can install a PC Card or ExpressCard in the computer while the computer is running. The computer automatically detects the card. PC Cards and ExpressCards are generally marked with a symbol (such as a triangle or an arrow) to indicate which end to insert into the slot. The cards are keyed to prevent incorrect insertion.

  • Page 35: Removing A Smart Card

       Removing a Smart Card CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Dell™ Product Information Guide.  NOTE: You can remove a smart card from the computer while the computer is running. Grasp the smart card by the edge with your fingers, and then pull the card straight out of the computer.
  • Page 36 If you encounter too much resistance, do not force the card. Check the card orientation and try again. smart card blank         Back to Contents Page  ...
  • Page 37 Back to Contents Page   Speaker Dell Precision ™ M2300 Service Manual CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Dell™ Product Information Guide.  CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.

  • Page 38: Removing The System Board

    Back to Contents Page   System Board Dell Precision ™ M2300 Service Manual   Removing the System Board   Installing the System Board  Removing the System Board CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Dell™ Product Information Guide.  CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.

  • Page 39: Installing The System Board

         Installing the System Board CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Dell™ Product Information Guide.  CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.  ...

  • Page 40: Removing The Processor Thermal-Cooling Assembly

    Back to Contents Page   Processor Thermal-Cooling Assembly Dell Precision ™ M2300 Service Manual   Removing the Processor Thermal-Cooling Assembly   Replacing the Processor Thermal-Cooling Assembly  Removing the Processor Thermal-Cooling Assembly CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Dell™ Product Information Guide.  CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.
  • Page 41 NOTICE: Ensure that all thermal-cooling pads adhere to both the thermal-cooling assembly and to the appropriate chips.   2. Place the assembly on the system board.   3. Tighten in consecutive order the four captive screws, labeled "1" through "4," on the thermal-cooling assembly.  ...

  • Page 42: Notes, Notices, And Cautions

    Microsoft Corporation; Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. and is used by Dell under license. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

This manual is also suitable for:

Latitude d630cPrecision m2300 pp18l

Table of Contents