Installing The Memory Module - Dell Precision M20 Service Manual

Dell precision m20 service manual
Hide thumbs Also See for Precision M20:
Table of Contents

Advertisement

NOTICE:
If you need to install memory modules in two connectors, install a memory module in the connector labeled "DIMM B" before you install a
module in the connector labeled "DIMM A."
 
Removing the Memory Module From DIMM B
 
1. Follow the instructions in
"Preparing to Work Inside the
 
2. Turn the computer over, loosen the captive screw in the memory module cover, and then remove the cover.
1
captive screw
NOTICE:
To prevent damage to the memory module connector, do not use tools to spread the inner metal tabs that secure the memory module.
NOTICE:
Handle memory modules by their edges, and do not touch the components on a module.
NOTE:
If you are replacing a memory module, remove the existing module.
 
3. Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.
 
4. Remove the module from the connector.
 

Installing the Memory Module

 
Computer."

Advertisement

Table of Contents
loading

Table of Contents