Dell Inspiron XPS Notice
Dell Inspiron XPS Notice

Dell Inspiron XPS Notice

Service manual
Hide thumbs Also See for Inspiron XPS:

Advertisement

Quick Links

Dell™ Inspiron™ XPS and Inspiron 9100 Service Manual
Before You Begin
Memory Module, Mini PCI Card, and Devices
System Components
Subwoofer
Bluetooth™ Card
Hard Drive
Fans
Hinge Covers
Keyboard
Modem
Reserve Battery
Display Assembly and Display Latch
Keyboard Bracket
Palm Rest
Video Card
Microprocessor Thermal-Cooling Assembly
Microprocessor Module
Speakers
Display Release Latch
System Board
Flashing the BIOS
Pin Assignments for I/O Connectors
 Notes, Notices, and Cautions
NOTE:
A NOTE indicates important information that helps you make better use of your computer.
NOTICE:
A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
CAUTION:
A CAUTION indicates a potential for property damage, personal injury, or death.
 Abbreviations and Acronyms
For a complete list of abbreviations and acronyms, see the Dell™ Inspiron™ Help file. To access the help file, see the Owner's Manual for your Dell computer.
If you purchased a Dell™ n Series computer, any references in this document to Microsoft® Windows® operating systems are not applicable.
Information in this document is subject to change without notice.
© 2004 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, and Inspiron are trademarks of Dell Inc.; Intel is a registered trademarks of Intel Corporation; Microsoft and Windows are
registered trademarks of Microsoft Corporation; Bluetooth is a trademark owned by Bluetooth SIG, Inc. and is used by Dell Inc. under license.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
Model PP09L
February 2004   Rev A00 

Advertisement

Table of Contents
loading

Summary of Contents for Dell Inspiron XPS

  • Page 1 Microsoft Corporation; Bluetooth is a trademark owned by Bluetooth SIG, Inc. and is used by Dell Inc. under license. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
  • Page 2: Before You Begin

    CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions in the Owner's Manual that came with the computer.
  • Page 3: Recommended Tools

    11.  Remove any installed memory modules, Mini PCI cards, and devices, including a second battery if one is installed. 12.  Remove the hard drive.   Recommended Tools   The procedures in this manual require the following tools:  #1 Phillips screwdriver  ¼-inch flat-blade screwdriver  Small plastic scribe  Flash BIOS update program floppy disk or CD...
  • Page 4: Screw Identification

    Screw Identification   When you are removing and replacing components, photocopy "Screw Identification" as a tool to lay out and keep track of the screws. The placemat provides the number of screws and their sizes.            ...
  • Page 5        Display Ground Screw:      (1 each)    Palm Rest:  Video Card:  Speakers:  (3 each)  (4 each)  (3 each)        (4 each)          Display Release Latch:  System Board:    (2 each)  (6 each)  ...
  • Page 6: Flashing The Bios

    Back to Contents Page   Flashing the BIOS Dell™ Inspiron™ XPS and Inspiron 9100 Service Manual 1.  Ensure that the AC adapter is plugged in and that the main battery is installed properly.   NOTE: If you use a BIOS update program CD to flash the BIOS, set up the computer to boot from a CD before inserting the CD.
  • Page 7: Bluetooth™ Card

    Back to Contents Page   Bluetooth™ Card  Dell™ Inspiron™ XPS and Inspiron 9100 Service Manual   CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
  • Page 8: Removing The Microprocessor Module

    Back to Contents Page   Microprocessor Module Dell™ Inspiron™ XPS and Inspiron 9100 Service Manual   Removing the Microprocessor Module   CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
  • Page 9: Installing The Microprocessor Module

    3  ZIF-socket cam screw 4  pin-1 corner   NOTE: The ZIF-socket cam screw secures the microprocessor to the system board. Take note of the arrow on the ZIF-socket cam screw, which indicates the direction to turn the cam screw. 9.  Lift out the microprocessor module.  ...
  • Page 10: Display Assembly And Display Latch

    Back to Contents Page   Display Assembly and Display Latch Dell™ Inspiron™ XPS and Inspiron 9100 Service Manual   Display Bezel   Display Panel   Display Latch                     CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.
  • Page 11   1  display cable 2  antenna cables (2) 3  system board connector 6.  Use the pull-tab to disconnect the display cable. 7.  Lift the display out of the computer at a 90-degree angle.     1  display       Display  ...
  • Page 12: Display Bezel

      1  M2.5 x 6-mm screws (6) 5  display bezel 2  rubber display bumpers (6) 6  display panel 3  M2.5 x 6-mm shoulder screws (2) 7  display base 4  screw covers (2) 8  M2.5 x 3-mm screws (8)   Display Bezel  ...
  • Page 13: Display Panel

      1  M2.5 x 6-mm screws (6) 2  rubber display bumpers (6) 3  display bezel 4  M2.5 x 6-mm shoulder screws (2) 5  screw covers (2)   Display Panel   CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.  ...
  • Page 14: Display Latch

      1  display-panel ground wire 2  M2 x 3-mm ground screw 3  M2 x 3-mm screws (8) 4  display panel   7.  Press in both sides of the top flex-cable connector, and pull the top flex-cable connector away from the display connector. 8.
  • Page 15 1.  Follow the instructions in "Preparing to Work Inside the Computer." 2.  Remove the display. 3.  Remove the display bezel. 4.  Remove the two M2.5 x 4-mm screws and remove the display latch.     1  M2.5 x 4-mm screws (2) 2  display latch  ...
  • Page 16 Back to Contents Page   Fans Dell™ Inspiron™ XPS and Inspiron 9100 Service Manual   CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
  • Page 17   1  fan 2  fan release lever 3  M2.5 x 6-mm screw 5.  Use the fan release lever to lift the fan out of the computer.   When replacing fan 2, press down on the fan surface labeled "Press here" to securely seat the fan in place.  ...
  • Page 19: Hard Drive

    Hard drives are extremely fragile; even a slight bump can damage the drive.   NOTE: Dell does not guarantee compatibility or provide support for hard drives from sources other than Dell.   NOTE: You need the Operating System CD to install the Microsoft® Windows® operating system. You also need the Drivers and Utilities CD for your computer to install the drivers and utilities on the new hard drive.
  • Page 20: Returning A Hard Drive To Dell

    8.  Use the Drivers and Utilities CD to install the drivers and utilities for your computer. For instructions, see "Reinstalling Drivers and Utilities" in your Owner's Manual.   Returning a Hard Drive to Dell   Return your old hard drive to Dell in its original or comparable foam packaging. Otherwise, the hard drive may be damaged in transit.      hard drive  foam packaging  ...
  • Page 21: Hinge Covers

    Back to Contents Page   Hinge Covers Dell™ Inspiron™ XPS and Inspiron 9100 Service Manual     CAUTION: Before working inside your computer, read the safety instructions in your Owner's Manual.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
  • Page 22   1  hinge cover snaps (2) c.  Open the display all the way (180 degrees) so that it lies flat against your work surface. d.  Lift the center hinge cover just enough to access the flex-cable connector. e.  Using the pull-tab, disconnect the center–hinge-cover flex cable from the system board connector.  ...
  • Page 23 Back to Contents Page   Keyboard Dell™ Inspiron™ XPS and Inspiron 9100 Service Manual     CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
  • Page 24       Back to Contents Page  ...
  • Page 25: Keyboard Bracket

    Back to Contents Page   Keyboard Bracket Dell™ Inspiron™ XPS and Inspiron 9100 Service Manual       CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
  • Page 26 Back to Contents Page   Display Release Latch Dell™ Inspiron™ XPS and Inspiron 9100 Service Manual   CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
  • Page 27: Removing The Modem

    Back to Contents Page   Modem Dell™ Inspiron™ XPS and Inspiron 9100 Service Manual     CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
  • Page 28   NOTICE: Ensure that the modem cable is routed correctly when you replace the modem.   NOTICE: Do not press down on the left side of the modem while installing it. 2.  Align the connector on the bottom of the modem with the modem connector on the system board and then press down on the right side of the modem to seat both connectors.
  • Page 29: Palm Rest

    Back to Contents Page   Palm Rest Dell™ Inspiron™ XPS and Inspiron 9100 Service Manual   CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
  • Page 30   1  M2.5 x 6-mm screws (4) 2  touch-pad connector       Back to Contents Page  ...
  • Page 31: Pin Assignments For I/O Connectors

    Back to Contents Page   Pin Assignments for I/O Connectors Dell™ Inspiron™ XPS and Inspiron 9100 Service Manual   USB Connector   Video Connector   S-Video TV-Out Connector   IEEE 1394 Connector   DVI-I Connector   USB Connector     Signal  USB5V+  USBP–  USBP+  GND   Video Connector     Signal Signal  CRT_R...
  • Page 32: Ieee 1394 Connector

      S-Video Signal  GND  GND  DLUMA-L  DCRMA-L   Composite Video Signal  NC  DCMPS-L  GND   IEEE 1394 Connector     Signal  TPB–  TPB+  TPA–  TPA+     DVI-I Connector     Signal Signal  TMDS DATA2–  TMDS DATA3+  TMDS DATA2+  +5V  TMDS DATA2/4 SHLD  GND (FOR +5V)  TMDS DATA4–...
  • Page 33  DDC DATA  TMDS DATA0/5 SHLD  ANALOG VERT SYNC  TMDS DATA5–  TMDS DATA1–  TMDS DATA5+  TMDS DATA1+  TMDS CLK SHLD  TMDS DATA1/3 SHLD  TMDS CLK+  TMDS DATA3–  TMDS CLK–   Signal  ANALOG RED VID OUT  ANALOG GRN VID OUT  ANALOG BLU VID OUT  ANALOG HOR SYNC  ANALOG COM GND RET  ...
  • Page 34: Reserve Battery

    Back to Contents Page   Reserve Battery Dell™ Inspiron™ XPS and Inspiron 9100 Service Manual     CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
  • Page 35 Back to Contents Page   Speakers Dell™ Inspiron™ XPS and Inspiron 9100 Service Manual   CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
  • Page 36: Removing The System Board

    Back to Contents Page   System Board Dell™ Inspiron™ XPS and Inspiron 9100 Service Manual   Removing the System Board   CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
  • Page 37: Installing The System Board

      1  M2.5 x 6-mm screws (4) 2  system board top assembly 12.  With the front of the computer facing you, lift the system board assembly from the right side, swinging it up, then lift the left side and draw the system board assembly out of the computer.
  • Page 38: System Components

    System Components Dell™ Inspiron™ XPS and Inspiron 9100 Service Manual   NOTICE: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty.   NOTICE: Unless otherwise noted, each procedure in this document assumes that a part can be replaced by performing the removal procedure in reverse order.
  • Page 39: Removing The Microprocessor Thermal-Cooling Assembly

    Back to Contents Page   Microprocessor Thermal-Cooling Assembly Dell™ Inspiron™ XPS and Inspiron 9100 Service Manual   Removing the Microprocessor Thermal-Cooling Assembly   CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
  • Page 40  ...
  • Page 41: Memory Module

    You can do so by touching an unpainted metal surface.   NOTE: Memory modules purchased from Dell are covered under your computer warranty.   NOTE: This computer requires matched memory modules and therefore, it always has two identical memory modules.
  • Page 42: Mini Pci Card

    FCC rules strictly prohibit users from installing 5-GHz (802.11a,802.11a/b, 802.11a/b/g) Wireless LAN Mini PCI cards. Under no circumstances should you install such a device. Only trained Dell service personnel are authorized to install a 5-GHz Wireless LAN Mini PCI card.
  • Page 43   CAUTION: Before working inside your computer, read the safety instructions in your Owner's Manual.   NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.   NOTE: 2.4-GHz Wireless LAN PC Cards may be removed and installed by the user.  ...
  • Page 44   1  securing tabs     NOTICE: To avoid damaging the antenna cables or the Mini PCI card, never place the cables under the card.   NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card. 5.
  • Page 45: Removing And Installing Devices While The Computer Is Turned Off

    1  antenna cables 7.  Replace the cover and tighten the captive screw.   Devices   Your computer ships with an optical drive installed in the module bay.   NOTICE: Insert devices into the module bay before you dock and turn on the computer.  ...
  • Page 46: Removing And Installing Devices While The Computer Is Running

    1  module bay device 2  device latch release 3.  Push the new device into the bay until it clicks.   Removing and Installing Devices While the Computer Is Running 1.  Before ejecting the device, double-click the Safely Remove Hardware icon on the taskbar, click the device you want to eject, and click Stop.  ...
  • Page 47         Back to Contents Page  ...
  • Page 48: Video Card

    Back to Contents Page   Video Card Dell™ Inspiron™ XPS and Inspiron 9100 Service Manual   CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
  • Page 49 Back to Contents Page   Subwoofer Dell™ Inspiron™ XPS and Inspiron 9100 Service Manual   CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
  • Page 50   1  battery 2  cable 3  subwoofer 4  subwoofer cable connector 5.  Connect the cable to the subwoofer connector. 6.  Replace the battery in the battery bay.     Back to Contents Page  ...

This manual is also suitable for:

Dimension 9100

Table of Contents