Inactivate A Linkaggregation Group (Fjla Term) - Fujitsu Solaris PCI GigabitEthernet 3.0 User Manual

# /etc/opt/FJSVla/bin/fjla init fjgi0 1:2 2
# fjgi0 FJ LinkAggregation now start.
● Before executing the command, the aggregator-interface must be already activated
(the interface can be displayed by ifconfig -a), and the member instances must not
be activated.
● The aggregator-interface must not be specified as a member instance.
● Configuration by the fjla init command will become ineffective after system reboot.
Use the /etc/opt/FJSVla/config file for permanent configuration.

4.2.2.2 Inactivate a LinkAggregation Group (fjla term)

This section explains the fjla term command for inactivating a LinkAggregation group.
- Synopsis
/etc/opt/FJSVla/bin/fjla term [
aggregator-interface
If aggregator-interface
4.2 Configuration of the LinkAggregation Feature
aggregator-interface
: Aggregator-interface name (including instance number)
is not specified, all LinkAggregation group will be inactivated.
]
53