How To Check The Driver Version - Fujitsu PRIMERGY 4Gbit/s FC I/O Modules Owner's Manual

1.3

How to Check the Driver Version

The following explains the procedure to check the driver version.
1
Click the "Start" button
"Administrative Tools"
2
Click "Device Manager".
3
Double-click "SCSI and RAID controllers".
4
Double-click the driver to be checked (Emulex Lightpulse
********* Storport Miniport Driver).
5
Click the [Driver] tab.
• For 32Bit
5-1.30.9
• For 64Bit
7-1.30.9
6
Click the [Driver Details].
7
Check the file version of "***DRIVERS\*****.sys" in "Driver files".
• For 32Bit
5-1.30A9 03/18/2007 WS2k3 32 bit build by:
• For 64Bit
7-1.30A9 03/18/2007 WS2k3 64 bit x64 built by:
8
Double-click the driver to be checked (ElxPlus or Emulex PLUS in
Emulex PLUS).
9
Click the [Driver] tab.
The driver version "5.1.0.14" or "7.1.0.14" appears.
10
Click the [Driver Details].
11
Check the file version of "***\elxplus.sys" in "Driver files".
• For 32Bit
5-1.00A14 03/19/2007 WS2K3 32 bit build by:
• For 64Bit
7-1.00A14 03/19/2007 WS2K3 64 bit x64 build by:
For details about the drivers for the other operating systems, refer to the website for Fujitsu
PRIMERGY (http://primergy.fujitsu.com).
→ →
"Settings" "Control Panel"
→
"Computer Management" in this order.
→
1 4Gbit/s FC I/O Module
E
47