Configuring Group Security Settings - Dell PowerConnect W-Airwave User Manual

Table 54 Adding a RADIUS Server Fields and Default Values (Continued)
Setting
Timeout (0-86400)
Max Retries
(0-20)
4. Select Add to complete the creation of the RADIUS server, or select Save if editing an existing RADIUS
server. The Groups > AAA Servers page displays this new or edited server. You can now reference this server
on the Groups > Security page.
AirWave supports reports for subsequent RADIUS Authentication. These are viewable by selecting Reports >
Generated, scrolling to the bottom of the page, and selecting Latest RADIUS Authentication Issues Report.
5. To make additional RADIUS configurations for device groups, use the Groups > Security page and continue
to the next topic.

Configuring Group Security Settings

The Groups > Security page allows you to set security policies for APs in a device group:
1. Select the device group for which to define security settings from the Groups > List page.
2. Go to Groups > Security. Some controls on this page interact with additional AirWave pages.
illustrates this page and
Dell PowerConnect W-AirWave 7.4 | User Guide
Default Description
None Sets the time (in seconds) that the access point waits for a response from the RADIUS
server.
None Sets the number of times a RADIUS request is resent to a RADIUS server before failing.
NOTE: If a RADIUS server is not responding or appears to be responding slowly, consider
increasing the number of retries.
Table 55 explains the fields and default values.
Configuring and Using Device Groups in AirWave | 81
Figure 41