Creating And Using Templates; Group Templates; Supported Device Templates; Template Variables - Dell PowerConnect W-Airwave User Manual

This chapter provides an overview and several tasks supporting the use of device configuration templates in
AirWave, and contains the following topics:
"Group Templates" on page 151

"Viewing and Adding Templates" on page 152

"Configuring General Template Files and Variables" on page 155

"Configuring Cisco IOS Templates" on page 160

"Configuring Cisco Catalyst Switch Templates" on page 162

"Configuring Symbol Controller / HP WESM Templates" on page 163

"Configuring a Global Template" on page 165


Group Templates

Supported Device Templates

Templates are helpful configuration tools that allow AirWave to manage virtually all device settings. A template
uses variables to adjust for minor configuration differences between devices.
The Groups > Templates configuration page allows you to create configuration templates for the following types
of devices:
Dell PowerConnect W

Aruba

Alcatel-Lucent

NOTE: Use the graphical Dell Config feature in support of Dell devices, particularly for AOS 3.3.2.x and later. Refer to the Dell
PowerConnect W-AirWave 7.4 Configuration Guide at
Cisco Aironet IOS autonomous APs

Cisco Catalyst switches

HP ProCurve 530 and WeSM controllers

Nomadix

Symbol

Trapeze

3Com

Nortel

Enterasys


Template Variables

Variables in templates configure device-specific properties, such as name, IP address and channel. Variables can
also be used to configure group-level properties, such as SSID and RADIUS server, which may differ from one
group to the next. The AirWave template understands many variables including the following:
Dell PowerConnect W-AirWave 7.4 | User Guide
Chapter 6

Creating and Using Templates

support.dell.com/manuals for additional information.
Creating and Using Templates | 151