Detected Interfering Devices Table; Active Bssids Table; Monitoring Data For Mesh Devices - Dell PowerConnect W-Airwave User Manual

Table 81 ARM Events table Columns and Values (Continued)
Column
Current Secondary
Channel
Change Reason

Detected Interfering Devices Table

For Dell PowerConnect W-Series APs running in Spectrum mode, the same non-802.11 interfering devices
identified in the Issues Summary section are classified in the Detected Interfering Devices table along with the
timestamp of its last detection, the start and end channels of the interference, the signal to noise ratio, and the
percentage of time the interference takes place, as illustrated in
format, and the displayed columns can be moved or hidden as needed.
Figure 87 Detected Interfering Devices Table Illustration
Possible device types for the Detected Interfering Devices table are:
Wi-Fi

Microwave

Bluetooth

Generic Fixed Freq

Cordless Phone Fixed Freq

Video Device Fixed Freq

Audio Device Fixed Freq

Generic Freq Hopper

Cordless Phone Freq Hopper

XBox Freq Hopper

Microwave Inverter

Cordless Base Freq Hopper

Unknown


Active BSSIDs Table

The Active BSSIDs table maps the BSSIDs on a radio with the SSID it broadcasts to the network, as illustrated in
Figure 88. This table appears only for Dell PowerConnect W-Series AP radios.
Figure 88 Active BSSIDs Table Illustration

Monitoring Data for Mesh Devices

The monitoring page for mesh devices includes basic device information at the top, two tables for Radios and
Wired Interfaces, a Clients interactive graph and a Usage interactive graph. Under these graphs are a list of
associated Clients, Mesh Links, RF Neighbors, and other common event logs and information.
128 | Discovering, Adding, and Managing Devices
Description
New secondary channel value after the change.
If the noise and interference cause for the change can be determined, they will be displayed here.
Mode change reasons are not yet tracked.
Figure 87. This table can be exported to CSV
Dell PowerConnect W-AirWave 7.4 | User Guide