Back to Contents Page
Palm Rest
Dell™ Inspiron™ M301Z/N301Z Service Manual
Removing the Palm Rest
Replacing the Palm Rest
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
Removing the Palm Rest
1. Follow the instructions in
Before You
2. Remove the battery (see
Removing the
3. Remove the module cover (see
4. Remove the keyboard (see
5. Turn the computer over.
6. Using a plastic scribe, remove the two rubber caps that cover the palm rest screws on the computer base.
1
rubber caps (2)
7. Remove the three screws that secure the palm rest to the computer base.
Begin.
Battery).
Removing the Module
Cover).
Removing the
Keyboard).
Removing the
Battery) before working inside the