Table of Contents
Advertisement
Menu Operations
Function Menu Options Continued
2. TXT LANGUAGE: To switch the teletext languages.
3. TXT EAST/WEST: To select EAST or WEST .
4.BLUE SCREEN:
if there is no signal.
5. RESET : Press V+ to reset some settings to the factory default .
Adjust Menu Options
1. Press MENU and V+/V- button until the following menu appears on the
screen
Note: This menu is only appears in PC mode .
2. Press P+/P- button to enter the adjust menu and to go up and down to
select the desired option .
3.Press V+/V- button to increase and decrease the level to adjust the
selected option to your preference .
4. Repeat step 2 and step 3 until desired quality has been achieved ..
Functions:
AUTO SYNC : Is opted for adjustment of picture location frequency and phase
parameters .
PHASE : Removes any horizontal distortion and clears or sharpness the displayed
characters .
CLOCK : Adjust the TFT-LCD to match the PC input source
H-POSITION : Picture horizontal adjust
V-POSITION : Picture vertical position adjust .
To set On, the screen will be in blue screen after 3 seconds
AUTO SYNC.
PHASE
CLOCK
H POSITION
V POSITION
ADJUST
50
50
50
50
Advertisement
Table of Contents
