Fujitsu LifeBook S7110 Bios Manual page 7

Drive1 Submenu of the Main Menu
The Drive1 submenu allows you to configure secondary
ATA devices.
Main
Type:
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
Ultra DMA Mode:
F1 Help
ESC Exit
Table 3: Fields, Options and Defaults for the Drive1 Submenu of the Main Menu
Menu Field Options
■
Type: Auto
■
None
■
Multi-Sector Disabled
Transfers:
■
2 Sectors
■
4 Sectors
■
8 Sectors
■
16 Sectors
■
LBA Mode Disabled
Control:
■
Enabled
PhoenixBIOS Setup Utility
Drive1 [MATSHITADVD-RAM UJ-841S]
[Auto]
[Disabled]
[Disabled]
[Standard]
[Disabled]
Select Item -/Space
Select Menu Enter
Figure 3. Drive1 Submenu
Default
[Auto]
[Disabled]
[Disabled]
Note that actual hard drive label shown may vary.
Depending on the drive type, information such as cylin-
ders, heads and sectors may also be displayed.
Item Specific Help
Select ATA/ATAPI drive
installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Change Values F9
Select Sub-Menu F10
Description
Selects the ATA/ATAPI device type. Select Auto to have the device (CD-
ROM, CD-R/RW, DVD-ROM, etc.) automatically identified by the BIOS
at POST. If None is selected, the following Set-up items do not appear.
This option cannot be changed when Auto is selected. Specify the num-
ber of sectors per block for multiple sector transfer.
Enables or disables Logical Block Addressing in place of Cylinder, Head,
Sector addressing. This option cannot be changed when Auto is selected.
7
M a i n M e n u
Setup Defaults
Save and Exit