Fujitsu LifeBook S7110 Bios Manual page 6

L i f e B o o k S S e r i e s N o t e b o o k B I O S
Drive0 Submenu of the Main Menu
The Drive0 submenu identifies what Serial ATA/IDE
devices are installed.
Main
Type:
Total Sectors:
Maximum Capacity:
F1 Help
ESC Exit
Menu Field Options
■
Type: Auto
■
None
LBA Format
Total Sectors: ---
Maximum ---
Capacity:
PhoenixBIOS Setup Utility
Drive0 [FUJITSU MHV2040BH]
[Auto]
LBA Format
78140160
40008MB SATA1
Select Item -/Space
Select Menu Enter
Figure 2. Drive0 Submenu
Default
[Auto]
---
---
Note that actual hard drive label shown may vary.
Depending on the drive type, information such as cylin-
ders, heads and sectors may also be displayed.
Item Specific Help
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Change Values F9 Setup Defaults
Select Sub-Menu F10 Save and Exit
Description
Select Auto to have the type of Serial or Parallel ATA device auto-
matically identified by the BIOS at POST. If None is selected, the fol-
lowing Set-up items do not appear.
Logical Block Addressing (LBA)
The total number of sectors on your hard disk
The maximum capacity of your hard disk
6