Fujitsu LifeBook P1610 User Manual page 65

P Series.book Page 57 Monday, October 9, 2006 10:58 AM
Problem
The display goes blank by
itself after you have been
using it.
(continued)
The display does not close.
The display has bright or
dark spots.
The application display uses
only a portion of your screen
and is surrounded by a dark
frame.
You have connected an
external monitor and it does
not display any information.
You have connected an
external monitor and it does
not come on.
Miscellaneous Problems
An error message is displayed
on the screen during the
operation of an application.
Can't change screen
orientation using Tablet and
Pen Settings.
Possible Cause
The notebook has gone into Press a button on the keyboard, or move the mouse to
Video Timeout, Standby Mode, restore operation. If that fails, push the Suspend/
or Hibernate Mode because you Resume button. Check your power management
have not used it for a period of settings, or close your applications and go to the Power
time. Savings menu of the setup utility to adjust the timeout
values to better suit your operation needs. See "BIOS
Setup Utility" on page 32.
A foreign object, such as a paper Remove all foreign objects from the keyboard.
clip, is stuck between the display
and the keyboard.
If the spots are very tiny and few This is normal; do nothing.
in number, this is normal for a
large LCD display.
If the spots are numerous or The display needs technical diagnosis; contact your
large enough to interfere with support representative.
your operation needs.
You are running an application When compensation is disabled, a clearer but smaller
that does not support the lower display for applications that use lower than the system
pixel resolution and display resolution will result. You can fill the screen but have
compression is enabled. less resolution by changing your compensation setting.
(See the Video Features submenu, located within the
Advanced menu of the BIOS. See "BIOS Setup Utility"
on page 32.
Your BIOS setup is not set to Try toggling the video destination by pressing [Fn] and
enable your external monitor. [F10] together, or check your BIOS setup and enable
your external monitor. (See the Video Features
submenu, located within the Advanced Menu of the
BIOS. See "BIOS Setup Utility" on page 32.
Your external monitor is not Reinstall your device. See "External Video Port" on
properly installed. page 48.
Your operating system software Check your device and operating system
is not set up with the correct documentation and activate the proper driver.
software driver for
that device.
Your external monitor may not See your monitor documentation and the External
be compatible with your system. Monitor Support portions of the Specifications section.
See "Specifications" on page 71.
Application software often has See your application manual and help displays screens
its own set of error message for more information. Not all messages are errors some
displays. may simply be status.
Incorrect system resolution. This LifeBook uses a lower resolution than that
required by this feature. To rotate the screen, use the
Rotation button.
T r o u b l e s h o o t i n g
Possible Solutions
57