Fujitsu LifeBook P1610 User Manual page 61

P Series.book Page 53 Monday, October 9, 2006 10:58 AM
Problem
You have installed an external
keyboard or mouse, and it
does not seem to work.
You have connected an
external keyboard or a mouse
and it seems to be locking up
the system.
Pen Input Problems
Cursor is not tracking the
pen
"Ink crossword" application
doesn't work properly.
Memory Problems
Power On screen or Info
menu of BIOS setup utility
information, does not show
the correct amount of
installed memory.
Modem Problems
Messages about modem
operation.
Modem does not appear to
work.
USB Device Problems
You have installed a USB
device, but your notebook
does not recognize the
device, or the device does not
seem to work properly.
Possible Cause
Your external device is not prop- Re-install your device. See "Device Ports" on page 47.
erly installed.
Your operating system software Check your device and operating system docu-menta-
is not set up with the correct tion and activate the proper driver.
driver for that device.
Your operating system software Check your device and operating system
is not set up with the correct documentation and activate the proper driver.
driver for that device.
Your system has crashed. Try to restart your system. If that fails, turn off the
power by pressing the suspend/resume button for at
least 10 seconds, and then power back on.
The system may be uncalibrated If the cursor on the screen appears to be misaligned
with the pen or is not accurately tracking the pen,
calibrate the pen. See "Calibrating the Touch Screen"
on page 26.
System has incorrect resolution This LifeBook model uses a lower resolution than the
minimum required by the application. The Ink Cross-
word application (found in Tablet PC Experience Pack)
cannot be used with this model.
Your memory upgrade module Turn off your system. Remove and re-install your
is not properly installed. memory upgrade module. See "Memory Upgrade
Module" on page 41.
You have a memory failure. Check for Power On Self Test (POST) messages. See
"Power On Self Test Messages" on page 58.
Messages about modem See your application software documentation for addi-
operation are generated by tional information.
whichever modem application is
in use.
Modem may not have been Verify that the modem has been initialized by the oper-
initialized. ating system. TO do so, right-click on My Computer
and select the Hardware tab. Click [Device Manager]
and click on the "+" symbol that appears next to
Modems. Verify that your device is listed as installed.
The device is not properly Remove and re-install the device. See "Device Ports" on
installed. page 47.
The device may have been Close the application and restart your notebook.
installed while an application
was running, so your system is
not aware of its installation.
Your software may not have the See your software documentation and activate the
correct driver active. correct driver.
T r o u b l e s h o o t i n g
Possible Solutions
53