Fujitsu LifeBook P2110 Bios Manual page 7

Secondary Master Submenu of the Main Menu
The Secondary Master submenu identifies which ATA
devices are installed.
Main
Secondary Master [SONY CD-RW CRX800E-(SM)]
Type:
Multi-Sector Transfers:
LBA Mode Control:
PIO Transfer Mode:
DMA Transfer Mode:
F1 Help
ESC Exit
Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu
Menu Field Options
Type: • Auto
• None
• Hard Disk
• CD-ROM
Cylinders: • A number
between 0
and 65,535
Heads: • A number
between 1
and 16
PhoenixBIOS Setup Utility
Advanced Security
[Auto]]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Select Item -/Space
Select Menu Enter
Figure 3. Secondary Master Submenu
Default Description
[Auto] Selects the ATA/ATAPI device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all
of the following Set-up items do not appear. If Hard Disk is selected,
you must specify the number of Cylinders, Heads, and Sectors for
the drive. Select CD-ROM to select parameters for CD-ROM drive.
–— This item appears only when the type is identified as Hard Disk.
When Hard Disk is selected, you can change the value. This field is
changed by incrementing (pressing the [Spacebar]) or by typing in
the number.
–— This item appears only when the type is identified as Auto or Hard
Disk. When Hard Disk is selected, you can change the value. This
field is changed by incrementing (pressing the [Spacebar]) or by
typing in the number.
Note: Actual drive label shown may vary. Depending on the
drive type, information such as cylinders, heads and sectors
may also be displayed.
Power Boot Info
Item Specific Help
Select ATA/ATAPI drive
installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
Except [Auto]
You enter parameters of
the drive.
[None]
The drive is disabled.
Change Values
Select Sub-Menu
M a i n M e n u
Exit
F9 Setup Defaults
F10 Save and Exit
7