Gigabyte GA-MA790FX-DQ6 User Manual page 84

For example, if you wish to create RAID with hard drives on the GSATAII_1 and GSATAII_2 connectors,
ensure that Onboard GSATA-II Ctrl2 is enabled. Set Onboard GSATA-II Ctrl2 Mode to RAID (Figure
2). If you do not want to create RAID, set this item to IDE or AHCI, depending on your need.
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Onboard LAN1 Function
Onboard LAN1 Boot ROM
SMART LAN1
Onboard LAN2 Function
Onboard LAN2 Boot ROM
SMART LAN2
Onboard ESATA-II Ctrl1
Onboard ESATA-II Ctrl1 Mode
Onboard GSATA-II Ctrl2
Onboard GSATA-II Ctrl2 Mode
: Move Enter: Select
F5: Previous Values
For example, if you wish to create RAID with hard drives on the eSATA 3Gb/s ports, ensure that
Onboard ESATA-II Ctrl1 is enabled. Set Onboard ESATA-II Ctrl1 Mode to RAID (Figure 2). If you
do not want to create RAID, set this item to IDE or AHCI, depending on your need.
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Onboard LAN1 Function
Onboard LAN1 Boot ROM
SMART LAN1
Onboard LAN2 Function
Onboard LAN2 Boot ROM
SMART LAN2
Onboard ESATA-II Ctrl1
Onboard ESATA-II Ctrl1 Mode
Onboard GSATA-II Ctrl2
Onboard GSATA-II Ctrl2 Mode
: Move Enter: Select
F5: Previous Values
Step 2:
Save changes and exit BIOS Setup.
The BIOS Setup menus described in this section may differ from the exact settings for your
motherboard. The actual BIOS Setup menu options you will see shall depend on the motherboard
you have and the BIOS version.
GA-MA790FX-DQ6 Motherboard
OnBoard PCIE Device
[Enabled]
[Disabled]
[Press Enter]
[Enabled]
[Disabled]
[Press Enter]
[Enabled]
[IDE]
[Enabled]
[RAID]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Figure 2
OnBoard PCIE Device
[Enabled]
[Disabled]
[Press Enter]
[Enabled]
[Disabled]
[Press Enter]
[Enabled]
[RAID]
[Enabled]
[IDE]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Figure 2
- 84 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults