Power Management Setup - Gigabyte GA-MA790FX-DQ6 User Manual

Am2+/am2 socket motherboard for amd phenom fx processor/ amd phenom processor/ amd athlon 64 fx processor/ amd athlon 64 x2 dual-core processor/ amd athlon 64 processor/amd sempron processor
Hide thumbs Also See for GA-MA790FX-DQ6:
Table of Contents

Advertisement

2-6

Power Management Setup

CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
ACPI Suspend Type
Soft-Off by Power button
Modem Ring Resume
USB Wake Up from S3
PME Event Wake Up
HPET Support
(Note)
Power On By Mouse
Power On By Keyboard
x KB Power ON Password
AC Back Function
Power-On by Alarm
x Date (of Month)
x Resume Time (hh:mm:ss)
: Move
Enter: Select
F5: Previous Values
ACPI Suspend Type
Specifies the ACPI sleep state when the system enters suspend.
S1(POS)
S3(STR)
Soft-Off by Power button
Configures the way to turn off the computer in MS-DOS mode using the power button.
Instant-Off
Delay 4 Sec.
Modem Ring Resume
Allows the system to be awakened from an ACPI sleep state by a wake-up signal from a modem
that supports wake-up function. (Default: Disabled)
USB Wake Up from S3
Allows the system to be awakened from ACPI S3 sleep state by a wake-up signal from the
installed USB device. (Default: Enabled)
(Note) Supported on Windows
Power Management Setup
[S1(POS)]
[Instant-off]
[Disabled]
[Enabled]
[Disabled]
[Enabled]
[Disabled]
[Disabled]
Enter
[Soft-Off]
[Disabled]
Everyday
0 : 0 : 0
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Enables the system to enter the ACPI S1 (Power on Suspend) sleep state
(default). In S1 sleep state, the system appears suspended and stays in a
low power mode. The system can be resumed at any time.
Enables the system to enter the ACPI S3 (Suspend to RAM) sleep state. In
S3 sleep state, the system appears to be off and consumes less power than
in the S1 state. When signaled by a wake-up device or event, the system
resumes to its working state exactly where it was left off.
Press the power button and then the system will be turned off instantly.
(Default)
Press and hold the power button for 4 seconds to turn off the system. If the
power button is pressed for less than 4 seconds, the system will enter
suspend mode.
Vista
operating system only.
®
®
- 49 -
Menu Level
F10: Save
ESC: Exit
F7: Optimized Defaults
Item Help
F1: General Help
BIOS Setup

Advertisement

Table of Contents
loading

Table of Contents