Gigabyte GA-M68MT-S2P User Manual page 60

Step 4:
Press <Esc> and then <Enter> to exit Q-Flash and reboot the system. As the system boots, you should see
the new BIOS version is present on the POST screen.
Step 5:
During the POST, press <Delete> to enter BIOS Setup. Select Load Optimized Defaults and press <Enter>
to load BIOS defaults. System will re-detect all peripheral devices after a BIOS update, so we recommend
that you reload BIOS defaults.
MB Intelligent Tweaker(M.I.T.)

Standard CMOS Features

Advanced BIOS Features

Integrated Peripherals

Power Management Setup

 PnP/PCI Configurations
PC Health Status

ESC: Quit
F8: Q-Flash
Step 6:
Select Save & Exit Setup and then press <Y> to save settings to CMOS and exit BIOS Setup. The proce-
dure is complete after the system restarts.
Unique Features
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Load Optimized Defaults (Y/N)? Y
Load Optimized Defaults
Press <Y> to load BIOS defaults
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
higf : Select Item
F10: Save & Exit Setup
- 60 -