Gigabyte GA-970A-D3P User Manual page 40

& CPU Vcore/Dram Voltage/+3.3V/+5V/+12V
Displays the current system voltages.
& CPU/System Temperature
Displays current CPU/system temperature.
& CPU/System/Power Fan Speed
Displays current CPU/system/power fan speed.
& CPU Warning Temperature
Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold, BIOS
will emit warning sound. Options are: Disabled (default), 60
& CPU/System/Power Fan Fail Warning
Allows the system to emit warning sound if the fan is not connected or fails. Check the fan condition or fan
connection when this occurs. (Default: Disabled)
& CPU Fan Control mode
Lets the BIOS automatically detect the type of CPU fan installed and sets the optimal CPU
Auto
fan control mode. (Default)
Sets Voltage mode for a 3-pin CPU fan.
Voltage
PWM Sets PWM mode for a 4-pin CPU fan.
& CPU Fan Speed Control
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
A llows the fan to run at different speeds according to the CPU temperature. You can adjust
Normal
the fan speed with EasyTune based on your system requirements. (Default)
Allows the fan to run at slow speeds.
Silent
Allows you to control the fan speed under the Slope PWM item.
Manual
Allows the fan to run at full speeds.
Disabled
& Slope PWM
Allows you to control the CPU fan speed. This item is configurable only when CPU Fan Speed Control is
set to Manual. Options are: 0.75 PWM value /
& 1st System Fan Speed Control (SYS_FAN1 Connector)
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
A llows the system fan to run at different speeds according to the system temperature. You
Normal
can adjust the fan speed with EasyTune based on your system requirements. (Default)
Allows the system fan to run at slow speeds.
Silent
Allows you to control the system fan speed under the Slope PWM item.
Manual
Allows the system fan to run at full speeds.
Disabled
& Slope PWM
Allows you to control the system fan speed. This item is configurable only when 1st System Fan Speed
Control is set to Manual. Options are: 0.75 PWM value /
BIOS Setup
C/140 F, 70 C/158
o o o
C ~ 2.50 PWM value / C.
o o
C ~ 2.50 PWM value /
o
- 40 -
F, 80 C/176 F, 90 C/194 F.
o o o o o
C.
o