Gigabyte GA-970A-D3P User Manual page 72

Step 2:
Connect an audio device to an audio jack. The Please select
a function dialog box appears. Select the device according
to the type of device you connect. Then click OK.
Step 3:
Go to the Speaker screen. On the Speaker Setting and
Test tab, select 2, 4, 6, or 8-channel speaker according to
the type of speaker configuration you wish to set up. Then
the speaker setup is completed.
B. Configuring Sound Effect
You may configure an audio environment on the Sound Effects tab.
C. Activating an AC'97 Front Panel Audio Module
If your chassis provides an AC'97 front panel audio module,
to activate the AC'97 functionality, click the Advanced
Options icon on the bottom right corner to open the
Advanced Options dialog box. Do not select the Enable
front panel jack detection check box. Click OK to complete.
D. Muting the Back Panel Audio (For HD Audio Only)
Click the Advanced Options icon on the bottom right
corner to open the Advanced Options dialog box. Select
the When plug in Headphone, mute Speaker check box.
Click OK to complete.
Appendix - 72 -