Using The Flash - Nikon D700 - Digital Camera SLR Quick Manual

Using the Flash

1
Raise the flash.
Press the flash pop-up button.
The built-in flash will pop up
and begin charging. When the
flash is fully charged, the flash-
ready indicator (c) will light.
2
Choose a flash mode.
Press the M button and rotate
the main command dial until the desired flash mode
icon is displayed in the control panel.
Display
24
M button
Main command dial
Mode
Front-curtain
sync
Red-eye
reduction
Red-eye
reduction with
slow sync
Flash pop-up button
Control panel
Display Mode
Slow sync
Rear-curtain sync