Table of Contents
Advertisement
5
Wrap the included foam strip around the cable, insert it into the opening
of the right-angle joint, and then wrap at least the first 50 mm (1 15/16
inches) of the cable using the included self bonding tape.
• Leave about 10 mm (3/8 inches) of the foam exposed, as shown.
• Stretch the tape to twice its length when you wrap the cable.
• Overlap the tape when you wrap the cable.
• Make sure that there are no gaps in the wrapped tape for water to enter.
6
Attach the camera by screwing the threaded mount into the stand
mounting hole.
• Loosen the flexible stand grip to make adjusting the angle of the camera easier. Once the
camera is adjusted to the desired angle, retighten the grip firmly into place.
7
Adjust the camera position.
• Leave some slack in the cable, as shown.
20
Threaded
mount
Grip
50 mm
(1 15/16 inches)
Hide quick links:
Advertisement
Table of Contents
