Day/Night Mode - D-Link DCS-5020L User Manual

Section 3 - Configuration
This section allows you to configure when Day and Night modes are used. Day mode uses the infrared cut filter to provide a corrected color image
for times where there is available lighting. Night mode moves the filter out of the way to use all available light, and turns on the IR LED illuminators
to allow for clear black and white video in dark areas with little or no light.
Auto: This mode will automatically switch between Day and Night mode based
on the amount of available lighting.
Manual:
This mode allows you to manually switch between modes through the
Live Video page.
Always Day This sets the camera to always use Day mode.
Mode:
Always Night
This sets the camera to always use Night mode.
Mode:
Day Mode This sets the camera to use Day mode during the times you specify, and
Schedule:
will switch to Night mode outside the times you specify.
D-Link DCS-5020L User Manual

Day/Night Mode

38 38