Manual Hardware Installation - D-Link DCS-5020L User Manual

Section 2 - Installation

Manual Hardware Installation

If you wish to set up your camera without using the Camera Setup Wizard, please follow the steps below:
Note: In order to use the mydlink features of this product, you will need to go through the Camera Setup Wizard or Zero Configuration
Setup.
Step 1 - Connect the Ethernet Cable and Power Cable
Use the included Ethernet cable and plug it into the camera. Plug the other
end into an available LAN port on your router. Plug the supplied power adapter
into the back of the camera
Step 2 - Plug in the External Power Adapter
Plug the power adapter into a wall outlet.
Step 3 - Configure Your Camera
Refer to "Configuration" on page 19 for information on how to configure
your camera.
Optional: Use WPS to Connect Wirelessly
You can use WPS to connect your camera to your network wirelessly. For more information, refer to "WPS - Push Button Setup"
on page 17. If your router does not support WPS, you will still be able to set up your camera's wireless settings in the camera's
web interface.
D-Link DCS-5020L User Manual 15