Video - D-Link DCS-5020L User Manual

Section 3 - Configuration
This section allows you to configure the video settings for your camera.
This section allows you to change the Resolution, FPS, and Quality.
Video Profile:
Encode Type: Your camera has separate settings for the H.264 and MJPEG video streams.
Resolution: Select the desired video resolution from three formats: 640x480, 320x240,
and 160x112. Higher settings offer better quality, but will require more
bandwidth to stream.
Bit Rate Select the desired bit rate for the video. A higher bit rate will increase
image quality, but will require more bandwidth to stream.
FPS:
Select the frame rate (FPS) to use for the video stream. Higher settings
offer better quality, but will require more bandwidth to stream.
JPEG Quality: Select one of five levels of image quality: Highest, High, Medium, Low,
and Lowest.
Default View Select the default encoding to use when viewing your video on the Live
Mode: Video page.
Light
Select the frequency used by your lighting and power to help reduce
Frequency:
image flicker.
D-Link DCS-5020L User Manual

Video

29 29