Programming universal remote controls
Programming universal remote
controls
Programming a different universal
remote control
You can operate your Dynex TV with a new or existing universal remote
control.
To program a different universal remote control:
1 See the table below for common codes. If you have problems
programming your remote or need a different remote control
code, visit www.dynexproducts.com/remotecodes for the latest
remote control code information.
2 Follow your universal remote control's instructions to enter the
TV code you found in Step 1.
Tips
•
If your universal remote control has a code
search feature, run a code search to identify a
code that matches your TV. See your universal
remote control's instructions for details.
•
If your universal remote control has a "Learn"
feature, you can manually program it using the
Dynex TV remote to "teach" the commands one
at a time. See your universal remote control's
instructions for details.
For additional help and information...
1. Visit http://www.dynexproducts.com/remotecodes
2. Call technical support for the universal remote control or
cable/satellite company of the remote/set-top box you are trying to
program.
3. Call the Dynex Customer Care Center 1-800-305-2204
Common universal remote control codes
Note
•
The following codes may not provide full
functionality. You may need to use the remote
control that came with your TV.
The following is a list of the most common remote control codes. Codes
for other remote controls are available online at:
www.dynexproducts.com/remotecodes, or check with your cable or
satellite TV provider for the remote control code.
Dynex TV codes for universal remote controls (for all
Dynex TVs manufactured after Jan. 1, 2007)
Universal remote control makes and models
One for All
Phillips
RCA
Sony
Set-top box makes and models
Cablevision
Charter
Comcast
Cox
DirectTV
Dish Network
Time Warner
TiVo
Verizon
Tips
•
The brand name is often visible on the front of
the universal remote control, and the model
number is often visible on the back.
•
If your universal remote control isn't listed on
the chart, refer to your universal remote
control's instructions and try codes for the
brands Orion, Emerson, Memorex, Sansui,
Sylvania, or Zenith. You may need to try several
codes before finding a match.
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product is subject
to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply within the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
DX-32L230A12
0054
0198, 0490
135
068, 069, 078, 096, 100, 164, 168, 229,
026
068, 069, 078, 096, 100, 164, 168, 229,
026
2002, 1204, 1423, 1517, 0171, 1963,
0463, 1463, 0842, 1326, 167, 415, 424,
450, 456, 461, 507, 523, 567, 577, 586
10171, 11204, 11326, 11463, 11517,
11641, 11780, 11785, 11892, 11963,
12002
1326, 1463
10171, 11204, 11326, 11517, 11564,
11641, 11963, 12002
720
400, 450, 461, 456, 11463, 1463, 0463
0091
0198, 0490
37