Dynex DX-32L230A12 User Manual page 13

Making connections
4 Connect the other end of the HDMI cable to the HDMI1 or
HDMI2 jack on the back or side of your TV.
AU DIO
DIG ITA L O U T P U T H DMI 1 P C I N
3.5 mm audio cable
HDMI cable with HDMI-DVI adapter
5 Connect a 3.5 mm audio cable (not provided) to the PC AUDIO IN
jack on the back of your TV and to the AUDIO OUT jack on the
cable or satellite box.
6 Turn on your TV, then turn on the cable or satellite box.
7 Go through the setup wizard on page 14.
Using component video (better)
To connect a cable or satellite box using component video:
1 Turn off your TV and all connected equipment.
2 Connect the incoming cable from the cable wall jack to the
cable-in jack on the cable or satellite box.
3 Connect a component video cable (not provided) to the
COMPONENT IN/Y, Pb, Pr jacks on the back of your TV and to
the component video out jacks on the cable or satellite box.
L
AU DIO
P
Y P
B
C O MP O N E N T I N
4 Connect an audio cable (not provided) to the L, R audio jacks on
the back of your TV and to the audio out jack on the cable or
satellite TV box.
5 Turn on your TV, then turn on the cable or satellite box.
6 Go through the setup wizard on page 14.
Back of TV
L AU DIO R
V G A
Y P
P
B R
C O MP O N E N T I N AN T / C AB L E I N
Cable or
satellite box
Cable or
satellite box
Cables are often
color-coded to match
color-coded jacks.
Back of TV
R
R P
R
AN T / C AB L E I N
Using composite video (good)
To connect a cable or satellite box using composite video:
1 Turn off your TV and all connected equipment.
2 Connect the incoming cable from the cable wall jack to the
cable-in jack on the cable or satellite box.
3 Connect a composite cable (provided) to the VIDEO, L and R
jacks on the side of your TV and to the composite video and audio
out jacks on the cable or satellite box.
Side of TV
Cables are often
color-coded to match
color-coded jacks.
Cable or satellite box
4 Turn on your TV, then turn on the cable or satellite box.
5 Go through the setup wizard on page 14.
Using coaxial (good)
To connect a cable or satellite box using coaxial:
1 Turn off your TV and all connected equipment.
2 Connect the incoming cable from the cable wall jack to the
cable-in jack on the cable or satellite box.
3 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack
on the back of your TV and to the coaxial out jack on the cable or
satellite box.
Cable or satellite box
4 Turn on your TV, then turn on the cable or satellite box.
5 Go through the setup wizard on page 14.
Note: Do not bundle (tie together) the coaxial cable with the power cord
or other cables.
9
DX-32L230A12
Back of TV
L AU DIO R
Y P P
B R
C O MP O N E N T I N AN T / C AB L E I N
Coaxial cable