Dynex DX-32L230A12 User Manual page 15

Making connections
Using component video (better)
To connect a DVD or Blu-ray player using component video:
1 Make sure that your TV's power cord is unplugged and the DVD or
Blu-ray player is turned off.
2 Connect a component video cable (not provided) to the
COMPONENT IN/Y, P
COMPONENT OUT jacks on the DVD or Blu-ray player.
Back of TV
L
AU DIO
Y P
P
B
C O MP O N E N T I N
3 Connect an audio cable (not provided) to the L and R audio jacks
on the back of your TV and to the L/R AUDIO OUT jacks on the
DVD or Blu-ray player.
Note:
When you connect the audio using the L and R audio jacks, the
audio output is analog.
To play a DVD or Blu-ray player connected with component video:
1 Turn on your TV, then press INPUT to open the INPUT SOURCE list.
2 Press or to select Component, then press ENTER.
Note:
You can also press COMP to select the DVD or Blu-ray player.
3 Turn on the DVD or Blu-ray player, then set it to the output mode.
See the documentation that came with the DVD or Blu-ray player
for more information.
, P jacks on the back of your TV and to the
B R
DVD or Blu-ray player
Cables are often
color-coded to match
color-coded jacks.
R
P
R R
AN T / C AB L E I N
Using composite video (good)
To connect a DVD or Blu-ray player using composite video:
1 Make sure that your TV's power cord is unplugged and the DVD or
Blu-ray player is turned off.
2 Connect a composite cable (provided) to the VIDEO and L and R
audio jacks on the side of your TV and to the AV OUT jacks on the
DVD or Blu-ray player.
Note:
When you connect the audio using the L and R audio jacks, the
audio output is analog.
Side of TV
Cables are often color-coded to
match color-coded jacks.
Connect yellow to yellow, red to red,
and white to white.
DVD or Blu-ray player
To play a DVD or Blu-ray player connected with composite video:
1 Turn on your TV, then press INPUT to open the INPUT SOURCE list.
2 Press or to select AV, then press ENTER.
Note:
You can also press VIDEO to select the DVD or Blu-ray player.
3 Turn on the DVD or Blu-ray player, then set it to the output mode.
See the documentation that came with the DVD or Blu-ray player
for more information.
11
DX-32L230A12