Fujitsu Plasmavision PDS4233W User Manual page 25

Option
(4) Input Priority
(5) Monitor No.
(6) Direct Setting
(for RGB)
(7) Code Setting
(for RGB2, RGB3)
(8) White Screen
(9) Exhibition Mode
(10) Installation
(11) Key Lock
(12) Information
USING THE FACTORY DEFAULT MENU
• Select FACTORY DEFAULT and execute to restore the adjustment/setting made in the MENU to factory
settings. (See P . 39.)
FACTORY DEFAULT Menu screen
Option
FACTORY DEFAULT
Function
Specifies input mode of
highest priority.
Selects display number.
Selects input signal.
Specifies and displays type
of input signal directly.
Sets up to display white
over the entire screen.
Sets up Exhibition mode.
Sets up whether horizontal
or vertical installation.
Locks the main unit button.
Displays system operation
status.
Yes/No selection screen
Function Operation
Restores the adjustment/ Select Execute and use
setting made in the MENU to select an option.
to factory settings.
Operation
Use or for switching.
Use or for switching.
Use or for switching.
Display Code Setting screen
and press or to select an
option.
Select Manual to set up
Parameter.
Use or for switching.
Use or for switching.
Use or for switching.
Use or for switching.
Display the "Information"
screen.
or
Range
Off/RGB2/RGB3/Video/
S-video/Comp.video
0 (no setup)
1/2/3/4
RGB1:
Auto/VGA/WVGA/XGA/
WXGA
RGB2, RGB3:
Auto/VGA/WVGA/480P/
XGA/WXGA/SXGA/
SXGA +
Auto/Manual
On /Off(disabled)
On (Exhibition mode)/
Off(disabled)
Horizontal/Vertical
On (Key Lock)/
Off(disabled)
Display only
Range
Yes/No
23