Table of Contents
Advertisement
66
IBM System x3850 X5 and x3950 X5 Types 7145 and 7146: Installation and User's Guide
DIMM
9. Insert the DIMM into the connector by aligning the edges of the DIMM with the
slots at the ends of the DIMM connector. Firmly press the DIMM straight down
into the connector 2 by applying pressure on both ends of the DIMM
simultaneously. The retaining clips snap into the locked position when the
DIMM is seated in the connector.
Note: If there is a gap between the DIMM and the retaining clips, the DIMM
has not been correctly inserted; open the retaining clips, remove the DIMM,
and then reinsert it.
Retaining
clip
Advertisement
Table of Contents
