Compaq ProLiant DL380 - G2 Server Setup And Installation Manual page 217

10 Compaq ProLiant DL380 Generation 2 Server Setup and Installation Guide
LEDs
AC power connected E-6
DIMM failure E-13
external health E-2
fans E-11
front panel E-2
front unit identification E-2
health, external E-2
health, internal E-2
hot-plug SCSI hard drives
internal health E-2
NIC 1 link/activity E-2
NIC 2 link/activity E-2
overtemperature E-13
PCI Hot Plug 8-3
power converter module E-12
power supply E-10
PPM failure E-13
processor failure E-13
rear unit identification E-9
riser/SCSI interlock
failure E-14
RJ-45 E-8
slot speed E-6
status combinations E-14
system board E-12
system power
troubleshooting D-7, D-8, D-9
legacy USB device support 1-10,
7-10
leveling jacks 2-6
lithium battery A-7
lithium manganese dioxide battery
warning A-7
loading the server ino the rack 4-9
drive activity E-3
fault status E-3
online status E-3
slot 2 fault E-7
slot 2 power E-7
slot 3 fault E-7
slot 3 power E-7
function E-2
illuminating at power up 4-18
location 4-18
logs See also Integrated
Management Log (IML)
server health 1-11
viewers 7-15
M
Main menu 8-14
maintenance and service
guide 4-20
maintenance, routine 4-20
management
features 1-10
remote operations See remote
access
management processor 5-5
mass storage devices
external, installing
optional 3-25
features, standard 1-6
measuring with the rack
template 4-2
memory See also DIMMs
capacity 1-4
configuration modes 3-19
features 1-4
insufficient during
install D-11
maximum configuration 3-20
online spare See online spare
memory
problem diagnosis D-11
Memory Resiliency Options
menu 7-8
menus, NetWare Configuration
Manager Console
Main 8-14
Slot Options 8-14
menus, ROM-Based Setup Utility
Advanced Options 7-5
Automatic Server
Recovery 7-5
Boot Controller Order 7-4
Date and Time 7-4
IPL Device Boot Order 7-4
PCI Devices 7-4