Dell 3200MP - XGA DLP Projector Safety Instructions page 29

Back to Contents Page
Troubleshooting: Dell™ 3200MP Projector
No image appears on the screen
Partial, scrolling, or incorrectly displayed image
The screen does not display your presentation
Image is unstable or flickering
Image has vertical flickering bar
Image is out of focus
The image is stretched when displaying 16:9 DVD
Image is reversed
Lamp is burned out or makes a popping sound
Remote mouse function does not work
If you experience problems with your projector, see the following troubleshooting tips. If the problem persists,
Dell.
No image appears on the screen
Ensure that the lens cap is removed and the projector is turned on.
Ensure the external graphics port is enabled. If you are using a Dell portable computer,
press
Ensure that all the cables are securely connected as described in
Projector."
Ensure that the pins of the connectors are not bent or broken.
Ensure that the lamp is securely installed (see
Partial, scrolling, or incorrectly displayed image
Press the R-Sync button on the
If you are using a Dell portable computer (for other computers consult your owner's
manual):
1. Set the resolution of the computer to XGA (1024 x 768):
2. Press
If you experience difficulty in changing resolutions or your monitor freezes, restart all the
equipment and the projector.
. For other computers, consult your owner's manual.
remote control
1a) Right click on the unused portion of your Windows desktop-» Properties-»
Settings tab.
1b) Verify the "Screen area" slide bar is set to 1024 x 768 pixels.
.
"Connecting the
"Changing the Lamp").
or the control panel.
contact