Brother HL-S7000DN Network User's Manual page 29

Multi-protocol on-board ethernet print server and wireless print server

Hide thumbs Also See for HL-S7000DN:

Table of Contents

Configuring your machine for a wireless network

When the LCD shows

Start WPS/AOSS on your wireless access point/router. Then press OK., press the

WPS or AOSS™ button on your wireless access point/router. See the user's guide for your wireless

access point/router for instructions.

Then press OK and your machine will now automatically detect which mode (WPS or AOSS™) your

wireless access point/router uses and try to connect to your wireless network.

If your wireless device is connected successfully, the display shows Connected.

The machine will print your machine's wireless status report. If the connection failed, check the error

code on the printed report and refer to uu Quick Setup Guide: Troubleshooting.

(Windows

)

You have completed the wireless network setup. If you would like to continue installing the

printer driver, please choose Install Printer Driver from the CD-ROM menu.

(Macintosh)

You have completed the wireless network setup. If you would like to continue installing the

printer driver, please choose Start Here OSX from the CD-ROM menu.

Table of Contents