Brother HL-S7000DN Network User's Manual page 26

Configuring your machine for a wireless network
k
Choose the Authentication method using a or b, and press OK.
Do one of the following:
If you chose LEAP, go to step q.
If you chose EAP-FAST, go to step l.
If you chose PEAP, go to step l.
If you chose EAP-TTLS, go to step l.
If you chose EAP-TLS, go to step m.
l
Choose the Inner Authentication method NONE, CHAP, MS-CHAP, MS-CHAPv2, GTC or PAP using a or b,
and press OK.
Go to step m.
Note
Depending on your Authentication method, the Inner Authentication method selections differ.
m
Choose encryption type TKIP or AES using a or b, and press OK.
Do one of the following:
If your Authentication method is EAP-TLS, go to step n.
For other Authentication methods, go to step o.
n
The machine will display a list of available Client Certificates. Choose the certificate and go to step o.
o
Choose the verification method No Verification, CA or CA + Server ID using a or b, and press
OK.
Do one of the following:
If you chose CA + Server ID, go to step p.
For other selections, go to step q.
Note
If you have not imported a CA certificate in your machine, the machine will display No Verification.
To import a CA certificate, see Using Certificates for device security uu page 65.
p
Enter the server ID. Press OK. (For information on how to enter text: uu Quick Setup Guide.) Go to step
q.
q
Enter the user ID you wrote down in step a. Press OK. (For information on how to enter text:
uu Quick Setup Guide.)
Do one of the following:
If your Authentication method is EAP-TLS, go to step s.
For other Authentication methods, go to step r.
r
Enter the Password you wrote down in step a. Press OK. Go to step s.
s
To apply the settings, choose Yes using a or b. To cancel, choose No. Then press OK.
Do one of the following:
If you chose Yes, go to step t.
If you chose No, go back to step g.
t
The machine will attempt to connect to the wireless network you have chosen.
3
20